How to Identify a Case for an iPad Air/Air 2/Pro 9.7 5th-6th Generation

How to Identify a Case for an iPad Air/Air 2/Pro 9.7 5th-6th Generation

Originally published March 25, 2019

This page covers cases that we support for keyguards to fit the iPad Air, Air 2, Pro 9.7, and 5th-6th Generation.

If you have an iPad other than an iPad Air, Air 2, Pro 9.7, 5th or 6th Generation, you're on the wrong page.

If you have an iPad other than an iPad Air, Air 2, 5th or 6th Generation, you're on the wrong page.

For any other iPad, look here.

When you order a keyguard for an iPad Air, Air 2, 5th or 6th Generation, specify the name and number of the case you find here. You must use the red number to correctly identify a case! Cases are listed alphabetically, but you can also search the page by the name of an iPad case to find one that is sold under more than one brand name.

If you have an iPad Air, Air 2, 5th or 6th Generation case that we don't have depicted here, specify "Other" case when ordering a keyguard and send us a link to the case you have. We'll charge you a small fee to buy the case, measure it, design a keyguard to fit it, and make and test fit the keyguard. After that, we'll add it to our list so you can order keyguards to fit it in the future.


ablenet-non-adjustable.jpg

AbleNet Non-Adjustable Cradle

While not really an iPad case, the AbleNet Non-Adjustable Cradle for the iPad is a variant of the RAM EZ-Roll'r, and we do make keyguards for it.

To order a keyguard for the Non-Adjustable Cradle, choose the matching  RAM EZ-Roll'r case below.


ablenet-127.png

AbleNet/Trident Kraken iPad Air 9.7 #127A

  • Screen opening: 8" x 6-3/16", 203 mm x 155 mm
  • Outside dimensions: 9-15/16" x 7-9/16" x 9/16", 252 mm x 193 mm x 15 mm 
  • Hard plastic case
  • Built in rotating handle stand
  • Comes with straps
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape

abovetek-34b.jpg

AboveTEK Anti-Theft Case for iPad Air/Air 2/5th-6th Gen 9.7"/7th-8th-9th Gen 10.2"/Air 3 10.5"/Pro 10.5 #34B

This is a locking all-metal metal security stand that can be desk mounted or wall mounted.

  • Screen opening: 8-11/16" x 6-7/16", 220 mm x 164 mm
  • Outside dimensions (without mount/stand): 12-3/4" x 8-9/16" x 3/4", 324 mm x 218 mm x 19 mm   
  • Hardened metal case
  • Optional wall/desktop mount
  • Internal adjustment to fit different iPad sizes from 9.7" to 10.5"
  • Need key to remove iPad
  • Available in black or white
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets

ace-323.jpg

ACEGUARDER Antibacterial iPad Air 2/5th-6th Gen 9.7 #323

  • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
  • Outside dimensions: 10-1/4" x 7-1/2" x 3/4", 261 mm x 190 mm x 19 mm
  • Variety of colors and designs
  • Adjustable stand 
  • The cover makes it easy to remove and install iPad.
  • Silicone cover over hard plastic shell. 
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape

adaptive-tech-rugged-rubber.jpg

Adaptive Tech Solutions Rugged Rubber

The Rugged Rubber case is a variant of the classic EVA folding handle stand. Adaptive Tech Solution's version adds a shoulder strap.

To order a keyguard for the Rugged Rubber, choose the matching  Classic EVA case below.


albc-162.jpg

ALBC Rugged Full Body iPad Air 9.7 #162A

  • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
  • Outside dimensions: 10-1/8" x 7-3/8" x 7/8", 258 mm x 187 mm x 23 mm
  • Silicone cover over hard plastic shell.
  • Built in stand
  • Easy to install and remove iPad.
  • No longer on Amazon
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape

amdi-iadapter-134.jpg

AMDI iAdapter 3, 4 and 5/5A for iPad 2/3/4/Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #134

  • Screen opening: 7-13/16" x 5-7/8", 198 mm x 149 mm
  • Outside dimensions (version 5): 11-9/16" x 8-7/16", 294 mm x 215 mm 
  • Comes with handle, shoulder strap, and folding stand
  • Built-in amplified speakers
  • Version 5 available in black only. Some older versions came in beige.  Optional colored skins may be added to newer versions.
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape

amdi-iadapter-115.jpg

AMDI iAdapter 6/6A for iPad 2/3/4/Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #115

  • Screen opening: 7-7/8" x 6", 200 mm x 152 mm
  • Outside dimensions: 11" x 8-1/2", 279 mm x 216 mm
  • Comes with handle, shoulder strap, and folding stand
  • Built-in amplified speakers
  • Available in black only. Optional colored skins may be added.
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape

andnary-433.jpg

Andnary Rotating Ring Stand iPad Air 2/Pro 9.7/5th-6th Gen 9.7 #433

  • Screen opening: 7-13/16" x 6", 199 mm x 152 mm
  • Outside dimensions (without ring stand): 10-3/16" x 7-7/16" x 13/16", 259 mm x 189 mm x 21 mm
  • Flexible silicone skin over polycarbonate shell
  • Thin shoulder strap
  • Rotating ring stand/handle
  • Comes in several colors
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Elastic straps (last resort)
Not Suitable for Suction cups, suction tape

armorbox-kido-179.jpg

ArmorBox Kido

The ArmorBox Kido case is a variant of the classic EVA folding handle stand.

To order a keyguard for the ArmorBox Kido, choose the matching  Classic EVA case below.


gonow-150.jpg

Attainment GoNow iPad Air/Air 2/Pro 9.7/5th Gen/6th Gen 9.7 #150

  • Screen opening: 7-13/16" x 5-7/8", 199 mm x 149 mm
  • Outside dimensions (with handle): 12-11/16" x 9", 323 mm x 228 mm
  • Air/Air 2/Pro 9.7 version has two speaker openings
  • 5th/6th Generation version has four speaker openings
  • Integrated handle
  • Optional case, cover stand, shoulder strap, and screen protector
Best Attachment Snap-In or lock-In for semi-permanent installation, magnetic for easy remove/install
Possible Attachment Velcro (good), straps (last resort)
Not Suitable for Suction cups, suction tape

grab-n-go.jpg

Attainment Grab 'n Go iPad Air/Air 2/Pro 9.7 #401

The Grab 'n Go is a stiff foam case that is also fits inside Attainment's TabletTable.

  • Screen opening: 9-1/8" x 6-3/8", 232 mm x 162 mm
  • Outside dimensions (with handle): 15" x 12-7/8" x 5-1/2", 380 mm x 331 mm x 142 mm
  • High density foam rubber
  • Grab 'n Go case also fits inside the Attainment TabletTable
Best Attachment Snap-in
Possible Attachment Suction cups, suction tape, Velcro (fair), straps (last resort)
Not Suitable for Lock-in, magnets


tablet-table.jpg

Attainment TabletTable iPad Air/Air 2/Pro 9.7 #401

The TabletTable is an angled handle stand that holds Attainment's Grab 'n Go case at a nice viewing angle.

  • Screen opening: 9-1/8" x 6-3/8", 232 mm x 162 mm
  • Outside dimensions (with handle): 15" x 12-7/8" x 5-1/2", 380 mm x 331 mm x 142 mm
  • Ergonomic, 22-degree angle design
  • Built-in handle
  • Non-skid bottom
  • The inside part of the TabletTable is Attainment's Grab 'n Go case
Best Attachment Snap-in
Possible Attachment Suction cups, suction tape, Velcro (fair)
Not Suitable for Lock-in, magnets, straps

avawo-400c.jpg

AVAWO Folding Handle w/ Built-in Screen Protector iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7" #400C

    This case actually has two different designs depending on which color you choose.  The one with the triangular strap openings in the upper corners of the folding handle is the same as the BMOUO case #119 below.  The other has the 90-degree arc around a smaller triangle in the corners.  They each have different designs on the back (pictured).  As far as making a keyguard goes, though, they're the same.

    • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
    • Outside dimensions (with handle): 10-7/16" x 10-11/16" x 7/8", 265 mm x 272 mm x 23 mm
    • Tough EVA foam case with rigid frame  
    • Built-in screen protector
    • Folding handle becomes stand
    • Holes for attaching shoulder strap (not included)
    • Comes in a variety of colors
    Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
    Possible Attachment Suction tape, elastic straps (last resort)
    Not Suitable for Magnets, suction cups


    avawo-455.jpg

    AVAWO/BMOUO Football Case w/ Removable Screen Protector iPad Air/Air 2/Pro 9.7/5th Gen/6th Gen 9.7 #455

    This case is sold under a variety of brand names.  It's easy to spot because of the distinctive openings on the upper corners where a shoulder strap (not included) could be attached, and the large football embossed on the back.   Not to be confused with the similar case #23 below.

    You'll find this case on our "To Fit Case" list as the  BMOUO Football Case #455.


    avawo-kids-case.jpg

    Avawo Kids Case

    The Avawo Kids Case is a variant of the classic EVA folding handle stand.

    To order a keyguard for the Avawo Kids Case, choose the matching  Classic EVA case below.


    avawo-327.jpg

    Avawo Steering Wheel Case iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #327

      This case is a generic silicone case with straps 

      • Screen opening: 8-7/16" x 6-3/16", 214 mm x 157mm
      • Outside dimensions (with handles): 12-3/16" x 8-5/16" x 3/4", 309 mm x 211 mm x 19 mm
      • Soft silicone material
      • Built in kickstand
      • Three handles for multiple ways to hold.
      • Available in blue or pink
      • Comes with straps
      Best Attachment Snap-in or lock-in for permanent mounting 
      Possible Attachment Suction cups, suction tape, straps (last resort)
      Not Suitable for Velcro, magnets

      ballistic-tough-jacket-128.jpg

      Ballistic Tough Jacket iPad Air/Air 2 #128A

      • Screen opening: 9-3/16" x 7", 233 mm x 178 mm
      • Outside dimensions, not including detachable stand or corner bumpers: 9-11/16" x 6-7/8" x 9/16", 246 mm x 175 mm x 15 mm
      • Tough plastic shell with soft elastic insert to hold iPad and protect corners
      • Detachable stand clips around hard shell
      • Discontinued, but came in several colors
      Best Attachment Snap-In
      Possible Attachment Suction cups, suction tape, straps (last resort)
      Not Suitable for Lock-in, Velcro, magnets

      bam-bino-325.jpg

      Bam Bino Hero iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #325A

        This case comes with a tempered glass screen protector.  It is NOT the case with the removable screen protector.  It is similar to a case sold under the SUPLIK and Ledniceker brands, but of a little lower quality.

        • Screen opening: 9-1/16" x 6-5/16", 231 mm x 161 mm
        • Outside dimensions (with handle and folded feet): 10-1/4" x 9-7/8" x 1-1/4", 260 mm x 244 mm x 31 mm
        • EVA foam case
        • Distinctive arched handle
        • Two folding plastic stands behind the lower corners
        • Built-in carrying handle
        • Comes in several colors
        Best Attachment Snap-in or lock-in for permanent mounting 
        Possible Attachment Suction cups, suction tape, straps (last resort)
        Not Suitable for Velcro, magnets

        bam-bino-22.jpg

        Bam Bino Box Kids Case iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #22

          This is certainly a unique case with its kid-friendly elastic shell and adult-ish folding folio cover.

          • Screen opening: 9-1/8" x 6-7/16", 231 mm x 161 mm
          • Outside dimensions (folio cover closed): 10-5/16" x 7-11/16" x 1", 262 mm x 195 mm x 25 mm
          • Tough elastic "box" shell
          • "Faux leather" folding folio cover
          • Funky "faux leather" handle
          • Available in blue or pink
          Best Attachment Snap-in or lock-in for permanent mounting 
          Possible Attachment Suction cups, suction tape, straps (last resort)
          Not Suitable for Velcro, magnets

          batyue-175.jpg

          BATYUE/BRAECN Rotating Ring Stand iPad Air 2/Pro 9.7/5th-6th Gen 9.7 #175

          This case is sold on Amazon under many different names, and even different listings call it different things. But it's easy to identify this case by the giant "X" on the back and the squared-off ring stand.

          Do not confuse this with the similar rotating handle stand. This case has a rigid plastic ring stand centered on the back of the case. That one has a Velcro strap that is placed off-center on the back. If you're going to choose one, this one is much more durable, the stand isn't as tippy, and it's harder for the kids to take apart.

          To order a keyguard to fit this case, choose the BRAECN Rotating Ring Stand case below.


          big-grips-frame-114.jpg

          Big Grips Frame iPad Air/Air 2/Pro 9.7/5th Gen/6th Gen 9.7 #114A

          • Screen opening: 9" x 6-3/16", 229 mm x 157 mm
          • Outside dimensions: 11-3/8" x 8-3/4" x 1-1/2", 286 mm x 222 mm x 38 mm
          • Comes in a couple different colors
          • Lightweight and easy to clean
          • The case is soft and squishy.
          Best Attachment Snap-in 
          Possible Attachment Suction cups, suction tape, straps (last resort)
          Not Suitable for Lock-in, Velcro, magnets

          big-grips-lift-133.jpg

          Big Grips Lift iPad Air/Air 2/Pro 9.7/5th Gen/6th Gen 9.7 #133A

          • Screen opening: 9-1/16" x 6-1/4", 230 mm x 159 mm
          • Outside dimensions (with handle): 11-1/4" x 9-11/16" x 1-9/16", 286 mm x 245 mm x 39 mm
          • Built-in handle
          • Comes in a couple different colors
          • Lightweight and easy to clean
          • The case is soft and squishy.
          Best Attachment Snap-in 
          Possible Attachment Suction cups, suction tape, straps (last resort)
          Not Suitable for Lock-in, Velcro, magnets

          big-grips-slim-123.jpg

          Big Grips Slim iPad Air/Air 2/Pro 9.7/5th Gen/6th Gen 9.7 #123

          • Screen openings: 9-1/8" x 6-5/16", 231 mm x 161 mm
          • Outside dimensions: 10-5/16" x 7-9/16" x 13/16", 261 mm x 192 mm x 20 mm
          • Comes in several colors
          Best Attachment Snap-in 
          Possible Attachment Suction cups, suction tape, straps (last resort)
          Not Suitable for Lock-in, Velcro, magnets


          bmouo-119b.jpg

          BMOUO Folding Handle w/ Built-in Screen Protector iPad Air 2/Pro 9.7/5th-6th Gen 9.7" #119B

            Not to be confused with the  Classic EVA case below or the HDE screen protector case below.  This one is distinguished by the triangular strap holes in the corners of the folding handle.

            • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
            • Outside dimensions (with handle): 10-3/8" x 10-11/16" x 13/16", 264 mm x 272 mm x 23 mm
            • Tough EVA foam case with rigid frame  
            • Built-in screen protector
            • Folding handle becomes stand
            • Holes for attaching shoulder strap (not included)
            • Comes in a variety of colors
            Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
            Possible Attachment Suction tape, straps (last resort)
            Not Suitable for Magnets, suction cups

            bmouo-455.jpg

            BMOUO/LTROP Football Case w/ Removable Screen Protector iPad Air/Air 2/Pro 9.7/5th Gen/6th Gen 9.7 #455

            This case is sold under a variety of brand names.  It's easy to spot because of the distinctive openings on the upper corners where a shoulder strap (not included) could be attached, and the large football embossed on the back.   Not to be confused with the similar case #23 below.

            You'll find this case on our "To Fit Case" list as the BMOUO Football Case #455.

            • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
            • Outside dimensions (with handle): 10-5/16" x 9-9/16" x 1-1/4", 262 mm x 240 mm x 32 mm
            • Removable front bezel with built-in screen protector
            • Football embossed on the back
            • Impact-resistant EVA material
            • Comes in a variety of colors 
            Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change (weak)
            Possible Attachment Elastic straps (last resort)
            Not Suitable for Suction cups, suction tape, magnets

            ledniceker-screen-protector-23.jpg

            BMOUO Kids Case w/ Removable Screen Protector iPad 5th-6th Gen 9.7 #23

              There are similar-looking cases branded with different names, but this is the one with the removable screen protector.  This is NOT the one that comes with a tempered-glass screen protector that is permanently attached to the iPad.

              To order a keyguard for the this case, choose the matching  Ledniceker case #23 with removable screen protector below.


              bmouo-112b.jpg

              BMOUO/Ledniceker Rotating Handle Stand iPad Air 2/Pro 9.7/9.7 5th-6th Gen 9.7 #112B

              This case is sold under several different brand names.  Be careful not to confuse it with similar-looking cases.  This one has the rotating handle centered on a big raised "curvy X".

              To order a keyguard to fit this case, choose the Ledniceker case #112B below.


              bolete-kids-shock-proof.jpg

              Bolete Kids Shock Proof

              The Bolete Kids Shock Proof is a variant of the classic EVA folding handle stand.

              To order a keyguard for the Bolete Kids Shock Proof, choose the matching  Classic EVA case below.


              braecn-heavy-duty-184.jpg

              BRAECN/BATYUE/TSQ/ZenCase/ZenRich Rotating Handle Stand iPad Air 2/Pro 9.7/5th-6th Gen 9.7. #184

              This case is sold on Amazon under many different names, and even different listings call it different things.  But it's easy to identify this case by the giant "X" on the back, the rotating Velcro hand strap, and the delicate shoulder strap.

              Do not confuse this case with the rotating ring stand below.  This case has a the off-center rotating Velcro strap on the back.  That one has a rigid plastic ring stand that is centered on the back.

              When ordering a keyguard, you'll find this case on our list as the BRAECN Rotating Handle Stand #184.

              • Screen opening: 7-7/8" x 5-5/16", 200 mm x 151 mm
              • Outside dimension (Without rotating stand): 9-3/4" x 7-1/16" x 13/16", 248 mm x 178 mm x 21 mm
              • Nice silicone skin over the flimsiest two-piece breakable plastic shell imaginable
              • Thin fabric shoulder strap with extremely thin metal or plastic clips, depending on the brand
              • Off-center folding stand makes it easy to tip over
              • Removable front clip comes apart if you drop it for easy access to the iPad
              • Kids can take it apart with one hand. No kidding.
              Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
              Possible Attachment Elastic straps (last resort)
              Not Suitable for Suction cups, suction tape

              braecn-175.jpg

              BRAECN/BATYUE Rotating Ring Stand iPad Air 2/Pro 9.7/5th-6th Gen 9.7. #175

              This case is sold on Amazon under many different names, and even different listings call it different things.  But it's easy to identify this case by the giant "X" on the back and the squared-off ring stand.

              Do not confuse this with the rotating handle stand above.  This case has a rigid plastic ring stand centered on the back of the case.  That one has a Velcro strap that is placed off-center on the back.  If you're going to choose one, this one is much more durable, the stand isn't as tippy, and it's harder for the kids to take apart.

              When ordering a keyguard, you'll find this case on our list as the BRAECN Rotating Ring Stand #175.

              • Screen opening: 7-7/8" x 5-5/16", 200 mm x 151 mm
              • Outside dimension (Without rotating stand): 9-15/16" x 7-1/8" x 13/16", 252 mm x 181 mm x 20 mm
              • Nice silicone skin over two-piece plastic shell
              • Thin fabric shoulder strap with extremely thin metal or plastic clips, depending on the brand
              • Rigid plastic ring stand centered on the back
              • Removable front clip gives easy access to the iPad
              Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
              Possible Attachment Elastic straps (last resort)
              Not Suitable for Suction cups, suction tape

              brenthaven-351.jpg

              Brenthaven Edge 360 iPad 5th-6th Gen 9.7. #351

              • Screen opening: 8-7/8" x 6-1/16", 225 mm x 154 mm
              • Outside dimensions: 10" x 7-1/4" x 9/16", 253 mm x 184 mm x 14 mm
              • Really thin shell 
              • Flimsy plastic screen bezel stays on better than cheap competitors
              • Comes with a stand
              • Comes in three colors
              Best Attachment Snap-in 
              Possible Attachment Suction cups, suction tape, straps (last resort)
              Not Suitable for Lock-in, Velcro, magnets


              buddibox-eva-series.jpg

              BuddiBox EVA Series

              The BuddiBox EVA Series is a variant of the classic EVA folding handle stand.

              To order a keyguard for the BuddiBox EVA Series, choose the matching  Classic EVA case below.


              caszone-26.jpg

              CASZONE Heavy Duto 360° Rotatable iPad 5th-6th Gen 9.7. #26A

              • Screen opening: 8-15/16" x 7-3/16", 252 mm x 182 mm
              • Outside dimensions: 9-15/16" x 7" x 13/16", 252 mm x 178 mm x 20 mm
              • Often imitated by even cheaper knockoffs
              • Really thin shell is tougher than you'd think
              • Nice, thick silicone skin
              • Flimsy plastic screen bezel stays on better than cheap competitors
              • Comes with rotating handle stand and shoulder strap
              • Comes in several colors
              Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
              Possible Attachment Straps (last resort)
              Not Suitable for Suction cups, suction tape

              cellular360-84.jpg

              Cellular360 ShockProof iPad 5th-6th Gen 9.7. #84

              Sometimes called Drop Proof, and sometimes called 360° Rotatable Kickstand and Handle.

              • Screen opening: 7-7/8" x 5-7/8", 200 mm x 149 mm
              • Outside dimensions (not including rotating handle): 9-15/16" x 7-13/16" x 11/16", 252 mm x 182 mm x 18 mm
              • Clever two-piece polycarbonate shell
              • Nice silicone skin
              • Comes with rotating handle stand
              • Optional shoulder strap
              • Good quality for the money
              • Comes in several colors
              Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
              Possible Attachment Straps (last resort)
              Not Suitable for Suction cups, suction tape, magnets

              chatwrap-131.jpg

              ChatWrap/Prio iPad Air 2/Pro 9.7/5th-6th Gen 9.7 #131

              • Screen opening: 9" x 6-1/4", 229 mm x 158 mm
              • Durable rubber boot inside hard polycarbonate shell
              • Padded handle
              • Built-in amplified speaker
              • Comes in several colors
              Best Attachment Snap-In
              Possible Attachment Suction cups, suction tape, straps (last resort)
              Not Suitable for Lock-in, Velcro, magnets


              armorbox-kido-45-157-159.jpg

              Classic EVA iPad Air #159A

                This case is sold under a huge variety of brand names.  There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.

                Over the years, the design has been offered in at least 5 variations.  You need to determine which variation you have, or the keyguard will not fit.  The list below shows how to determine if you have this model.

                • Screen opening: 8-3/8" x 5-7/8", 213 mm x 149 mm
                • Outside dimensions (with handle):  10-1/8" x 10-3/16" x 3/4", 257 mm x 258 mm x 19 mm
                • Slotted back for inserting iPad
                • Round extension covering the home key, notch around camera
                • Folding handle becomes stand
                • Comes in several colors

                Measure to be sure it's not mistaken for #157 or #45A.

                Best Attachment Snap-In
                Possible Attachment Suction cups, suction tape, straps (last resort)
                Not Suitable for Lock-in, Velcro, magnets

                armorbox-kido-45-157-157.jpg

                Classic EVA iPad Air #157

                  This case is sold under a huge variety of brand names. There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.

                  Over the years, the design has been offered in at least 5 variations. You need to determine which variation you have, or the keyguard will not fit. The list below shows how to determine if you have this model.

                  • Screen opening: 8-3/4" x 6", 222 mm x 152 mm
                  • Outside dimensions (with handle): 10-3/8" x 10-7/16" x 13/16", 264 mm x 267 mm x 21 mm
                  • Slotted back for inserting iPad
                  • Round extension covering the home key, notch around camera
                  • Folding handle becomes stand
                  • Comes in several colors

                  Measure to be sure it's not mistaken for #159A or #45A.

                  Best Attachment Snap-In
                  Possible Attachment Suction cups, suction tape, straps (last resort)
                  Not Suitable for Lock-in, Velcro, magnets

                  armorbox-kido-45-157-159.jpg

                  Classic EVA iPad Air/Air 2 #45A

                    This case is sold under a huge variety of brand names. There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.

                    Over the years, the design has been offered in at least 5 variations. You need to determine which variation you have, or the keyguard will not fit. The list below shows how to determine if you have this model.

                    • Screen opening: 8-13/16" x 6-1/8", 224 mm x 155 mm
                    • Outside dimensions (with handle): 10-1/2" x 10-5/8" x 13/6", 266 mm x 267 mm x 21 mm
                    • Slotted back for inserting iPad
                    • Round extension covering the home key, notch around camera
                    • Folding handle becomes stand
                    • Comes in several colors

                    Measure to be sure it's not mistaken for #157 or #159A.

                    Best Attachment Snap-In
                    Possible Attachment Suction cups, suction tape, straps (last resort)
                    Not Suitable for Lock-in, Velcro, magnets

                    armorbox-kido-99-119.jpg

                    Classic EVA iPad Air 2/5th-6th Gen 9.7/Pro 9.7 #119A

                      This case is sold under a huge variety of brand names. There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.

                      Over the years, the design has been offered in at least 5 variations. You need to determine which variation you have, or the keyguard will not fit. The list below shows how to determine if you have this model.

                      • Screen opening: 9" x 6-1/4", 229 mm x 159 mm
                      • Outside dimension (with handle): 10-3/16" x 10-9/16" x 7/8", 259 mm x 268 mm x 21 mm
                      • iPad is inserted from the front - no slot in back
                      • Angled notch on one end of opening for access to home key, camera end is straight
                      • Folding handle becomes stand
                      • Comes in several colors

                      Measure to be sure it's not mistaken for #99.

                      Best Attachment

                      Snap-in or lock-in for permanent mounting

                      Possible Attachment Suction cups, suction tape, straps (last resort)
                      Not Suitable for Velcro, magnets

                      armorbox-kido-99-119.jpg

                      Classic EVA iPad Air 2/5th-6th Gen 9.7/Pro 9.7 #99

                        This case is sold under a huge variety of brand names. There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.

                        Over the years, the design has been offered in at least 5 variations. You need to determine which variation you have, or the keyguard will not fit. The list below shows how to determine if you have this model.

                        • Screen opening: 9-1/8" x 6-1/4", 231 mm x 159 mm
                        • Outside dimension (with handle): 10-5/16" x 10-9/16" x 7/8", 262 mm x 269 mm x 22 mm
                        • iPad is inserted from the front - no slot in back
                        • Angled notch on one end of opening for access to home key, camera end is straight
                        • Folding handle becomes stand
                        • Comes in several colors

                        Measure to be sure it's not mistaken for #119A.

                        Best Attachment

                        Snap-in or lock-in for permanent mounting

                        Possible Attachment Suction cups, suction tape, straps (last resort)
                        Not Suitable for Velcro, magnets

                        compusult-eva2-148.jpg

                        Compusult EVA2 iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #148A

                        • Screen opening: 9-1/4" x 6-3/8", 234 mm x 162 mm
                        • Outside openings (with handle): 10-1/2" x 11-7/16" x 15/16", 267 mm x 291 mm x 24 mm
                        • Folding handle becomes stand
                        • Detachable shoulder strap
                        • Available in black, blue, and pink
                        Best Attachment Snap-In
                        Possible Attachment Suction cups, suction tape, straps (last resort)
                        Not Suitable for Lock-in, Velcro, magnets

                        cooper-bounce-strap-130.jpg

                        Cooper Bounce Strap iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #130A

                        • Screen openings: 8-1/4" x 6-1/4", 210 mm x 158 mm
                        • Outside dimension (without corner bumpers): 9-3/4" x 7-3/16" x 3/16", 248 mm x 182 mm x 21 mm
                        • Made from stretchy silicone
                        • Four holes in corners to fit optional shoulder strap
                        • Super-flimsy folding stand on back
                        • Available in black, blue, pink, and camouflage
                        Best Attachment

                        Snap-in or lock-in for permanent mounting

                        Possible Attachment Suction cups, suction tape, straps (last resort)
                        Not Suitable for Velcro, magnets

                        cooper-dynamo.jpg

                        Cooper Dynamo

                        The Cooper Dynamo is a variant of the classic EVA folding handle stand.

                        To order a keyguard for the Cooper Dynamo, choose the matching Classic EVA case above.



                        cyber-142.jpg

                        Cyberacoustics lC-1930 iPad Air/5th-6th Gen 9.7 #142A

                        • Screen opening: 9-3/16" x 6-1/2", 234 mm x 165 mm
                        • Outside dimensions: 9-3/4" x 7" x 5/8",  248 mm x 178 mm x 16 mm
                        • Rotating handle stand on back
                        • Flexible EVA foam
                        • Stretch to fit over iPad
                        • Interior pocket flap
                        Best Attachment
                        Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
                        Not Suitable for Lock-in, magnets, snap-in

                        etopxizu-tablet-case.jpg

                        eTopxizu Tablet Case

                        The eTopxizu Tablet Case is a variant of the classic EVA folding handle stand.

                        To order a keyguard for the eTopxizu Tablet Case, choose the matching Classic EVA case above.


                        folio-102b.jpg

                        Fintie Folio Cover iPad Air 9.7 #102B

                        • Screen opening: 8" x 6-1/16", 203 mm x 155 mm
                        • Outside dimensions: 9-9/16" x 6-11/16" x 5/8 ", 243 mm x 170 mm x 15 mm
                        • This version has a trapezoidal camera opening, and the screen opening is a straight line at the camera end
                        • The home key is exposed to the screen opening by a rounded V-shaped cutout
                        • Detachable folding stand clips to both sides of the case
                        • Available in different colors
                        • Multiple colors and designs
                        Best Attachment Snap-In
                        Possible Attachment Suction cups, suction tape, straps (last resort)
                        Not Suitable for Lock-in, Velcro, magnets

                        fintie-kiddie.jpg

                        Fintie Kiddie (not Kiddie Light)

                        The Fintie Kidde, also called the Fintie Casebot Kiddie, is a variant of the classic EVA folding handle stand.  Do not confuse it with the Fintie Kiddie Light, or the Fintie Casebot Kiddie Light.

                        To order a keyguard for the Fintie Kiddie, choose the matching Classic EVA case above.


                        fintie-kiddie-167.jpg

                        Fintie Kiddie Light iPad Air/Air 2/Pro 9.7 #167

                        The Fintie Kidde Light is also called the Casebot Kiddie Light. Do not confuse it with the Fintie Kiddie, or the Fintie Casebot Kiddie.

                        • Screen opening: 9-1/8" x 6-7/16", 232 mm x 163 mm
                        • outside dimensions (without corner bumpers): 9-7/8" x 7-1/4" x ", 251 mm x 185 mm x 22 mm
                        • Flexible EVA foam
                        • Stretch to fit over iPad
                        Best Attachment

                        Snap-in 

                        Possible Attachment Suction cups, suction tape, straps (last resort)
                        Not Suitable for Lock-in, Velcro, magnets 

                        fintie-mighty-shield-97.jpg

                        Fintie Kiddie Mighty Shield iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #97A

                        • Screen opening: 9" x 6-1/4", 229 mm x 159 mm
                        • Outside dimensions (measured across the center): 10-3/8" x 7-5/8" x 1-1/8", 265 mm x 193 mm x 28 mm
                        • Rotating handle stand on back
                        • Flexible EVA foam
                        • Stretch to fit over iPad
                        Best Attachment Snap-In
                        Possible Attachment Suction cups, suction tape, straps (last resort)
                        Not Suitable for Lock-in, Velcro, magnets

                         

                        fintie-82b.jpg

                        Fintie Tuatara iPad Air 2 #82B

                        • Screen opening: 8" x 6-1/16", 203 mm x 154 mm
                        • Outside dimensions: 9-13/16" x 7-1/16" x 1/2", 249 mm x 179 mm x 14 mm
                        • Has a built in rotating handle stand.
                        Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
                        Possible Attachment Straps (last resort)
                        Not Suitable for Suction cups, suction tape, magnets

                        griffin-survivor-all-terrain-135.jpg

                        Griffin Survivor All-Terrain iPad Air #135

                        • Screen opening: 7-15/16" x 5-15/16", 201 mm x 150 mm
                        • Outside dimensions: 9-15/16" x 7-3/16" x 3/4", 253 mm x 182 mm x 20 mm
                        • This version has an oval camera opening, and the screen opening is a straight line across both ends with no additional bulges or cutouts
                        • The home key is covered with a small round elastic button 
                        • Detachable folding stand
                        • Available in different colors
                        Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
                        Possible Attachment Straps (last resort)
                        Not Suitable for Suction cups, suction tape

                        griffin-survivor-all-terrain-138.jpg

                        Griffin Survivor All-Terrain iPad Air 2 #138

                        • Screen opening: 8" x 6", 203 mm x 153 mm
                        • Outside dimensions: 10" x 7-3/8" x 3/4", 254 mm x 188 mm x 19 mm
                        • This version has an oval camera opening with a little plastic bulge around it that makes it different from most other All-Terrains
                        • The home key is exposed to the screen opening by a rounded V-shaped cutout
                        • Detachable folding stand clips to only one side of the case
                        • Available in different colors
                        Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
                        Possible Attachment Straps (last resort)
                        Not Suitable for Suction cups, suction tape

                        griffin-survivor-all-terrain-96.jpg

                        Griffin Survivor All-Terrain iPad Air 2/Pro 9.7/9.7 5th-6th Gen 9.7 #96

                        • Screen opening: 8" x 6-1/16", 203 mm x 154 mm
                        • Outside dimensions (with stand): 10-1/16" x 7-3/4" x 5/8 ", 255 mm x 196 mm x 19 mm
                        • This version has a trapezoidal camera opening, and the screen opening is a straight line at the camera end
                        • The home key is exposed to the screen opening by a rounded V-shaped cutout
                        • Detachable folding stand clips to both sides of the case
                        • Available in different colors
                        Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
                        Possible Attachment Straps (last resort)
                        Not Suitable for Suction cups, suction tape

                        griffin-survivor-extreme-102.jpg

                        Griffin Survivor Extreme iPad 9.7 5th/6th Gen 9.7 #102A

                        • Screen opening:  7-15/16" x 6-1/16", 202 mm x 154 mm
                        • Outside dimensions (with stand): 10-1/8" x 7-3/4" x 5/8", 257 mm x 196 mm x 16 mm
                        • This version has a trapezoidal camera opening with a little plastic bulge around it, but the screen opening at the camera end is a straight line
                        • The home key is exposed to the screen opening by a rounded V-shaped cutout
                        • Detachable folding stand clips to both sides of the case
                        • Available in different colors
                        Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
                        Possible Attachment Straps (last resort)
                        Not Suitable for Suction cups, suction tape

                        griffin-survivor-slim-83.jpg

                        Griffin Survivor Slim iPad Air/Air 2 #83A

                        • Screen opening: 8" x 5-15/16", 203 mm x 151 mm
                        • Outside dimensions: 9-15/16" x 7-1/8" x 11/16", 252 mm x 181 mm x 17 mm
                        • Oval camera opening
                        • Home key is exposed to the screen opening by a rounded V-shaped cutout
                        • Sturdy attached folding stand
                        • Available in different colors 
                        Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
                        Possible Attachment Straps (last resort)
                        Not Suitable for Suction cups, suction tape

                        griffin-survivor-slim-81.png

                        Griffin Survivor Slim iPad Air 2/Pro 9.7 #81

                        • Screen opening: 8" x 6", 203 mm x 153 mm
                        • Outside dimensions: 10-1/16" x 7-1/8" x 9/16", 256 mm x 181 mm x 15 mm
                        • Round camera opening
                        • Home key is exposed to the screen opening by a rounded V-shaped cutout
                        • Sturdy attached folding stand with stylus holder
                        • Available in different colors 
                        Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
                        Possible Attachment Straps (last resort)
                        Not Suitable for Suction cups, suction tape

                        gripcase-67.png

                        Gripcase (not Shield) iPad Air #67A

                        • Screen opening: 8-7/8" x 6-13/16", 225 mm x 157 mm
                        • Outside dimension (with handles): 12-1/4" x 9-5/8" x 15/16", 313 mm x 245 mm x 24 mm
                        • Bumpers on all four sides serve as handles
                        • Optional detachable stand and shoulder strap
                        • No strap holes in corners
                        • Available in several colors
                        Best Attachment Snap-In
                        Possible Attachment Suction cups, suction tape, straps (last resort)
                        Not Suitable for Lock-in, Velcro, magnets

                        gripcase-90.jpg

                        Gripcase iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #90A

                        • Screen opening: 9" x 6-5/16", 230 mm x 160 mm
                        • Outside dimensions (with handles): 12-15/16" x 9-13/16" x 15/16", 328 mm x 249 mm x 25 mm
                        • Bumpers on all four sides serve as handles
                        • Strap holes in corners to fit optional shoulder strap
                        • Available in several colors
                        Best Attachment Snap-In
                        Possible Attachment Suction cups, suction tape, straps (last resort)
                        Not Suitable for Lock-in, Velcro, magnets

                        gripcase-shield-65.png

                        Gripcase Shield iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #65A

                        • Screen openings: 9-1/8" x 6-7/16", 231 mm x 164 mm
                        • Outside dimensions: 11-15/16" x 9-1/4" x 13/16", 302 mm x 235 mm x 21 mm 
                        • Strap holes in corners to fit optional shoulder strap 
                        • Made of tough EVA foam
                        • Available in black, blue and red
                        Best Attachment Snap-In
                        Possible Attachment Suction cups, suction tape, straps (last resort)
                        Not Suitable for Lock-in, Velcro, magnets

                        gumdrop-193.png

                        Gumdrop Bounce Skin iPad Air 9.7 #193

                        • Screen opening: 8" x 6-1/16", 204 mm x 155 mm
                        • Outside dimensions: 9-11/16" x 7-1/16" x 5/8", 247 mm x 180 mm x 16 mm
                        • Frame has a trapezoidal cutout at the camera end and a rounded cutout at the home key end
                        • Available in a variety of colors
                        Best Attachment Snap-In or lock-in for permanent mounting
                        Possible Attachment Suction cups, suction tape, straps (last resort)
                        Not Suitable for Velcro, magnets


                        gumdrop-droptech-87.png

                        Gumdrop DropTech iPad Air #87A

                        • Screen opening: 7-7/8" x 5-7/8", 200mm x 149 mm
                        • Outside dimensions: 9-7/8" x 7-1/16" x 5/8", 250 mm x 180 mm x 16 mm
                        • Oval camera opening
                        • Home key is covered with small elastic button as part of elastic skin
                        • Silicone skin over ABS shell 
                        • Available in a variety of colors 
                        Best Attachment Snap-In or lock-in for permanent mounting
                        Possible Attachment Suction cups, suction tape, straps (last resort)
                        Not Suitable for Velcro, magnets

                        gumdrop-droptech-110.jpg

                        Gumdrop DropTech iPad Air 2/Pro 9.7 #110

                        • Screen opening: 8-1/2" x 5-7/8", 216 mm x 150 mm
                        • Outside dimensions: 9-13/16" x 7-1/16" x 9/16", 249 mm x 180 mm x 15 mm
                        • Frame has a trapezoidal cutout at the camera end and a rounded cutout at the home key end
                        • Silicone skin over ABS shell
                        • Available in a variety of colors
                        Best Attachment Snap-In or lock-in for permanent mounting
                        Possible Attachment Suction cups, suction tape, straps (last resort)
                        Not Suitable f Velcro, magnets

                        gumdrop-droptech-clear-116.jpg

                        Gumdrop DropTech Clear iPad 5th/6th Gen 9.7 #116

                        • Screen opening: 8-5/8" x 6-1/4", 219 mm x 159 mm
                        • Outside dimensions: 9-13/16" x 7-1/8" x 5/8", 249 mm x 180 mm x 17 mm
                        • Frame has a trapezoidal cutout at the camera end and a rounded cutout at the home key end
                        • Silicone skin over ABS shell
                        • Available in a variety of colors
                        Best Attachment Snap-In or lock-in for permanent mounting
                        Possible Attachment Suction cups, suction tape, straps (last resort)
                        Not Suitable for Velcro, magnets

                        gumdrop-foamtech-151.png

                        Gumdrop FoamTech iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #151A

                        • Screen opening: 8-15/16" x 6-3/16", 227 mm x 158 mm
                        • Outside dimensions (with handle): 10-1/2" x 10-5/8" x 15/16", 266 mm x 270 mm x 24 mm
                        • Outside dimensions (ignoring handle): 10-1/2" x 8-3/4" x 15/16", 266 mm x 223 mm x 23 mm
                        • Foam case with folding handle stand
                        • Available in a variety of colors
                        Best Attachment Snap-In
                        Possible Attachment Suction cups, suction tape, straps (last resort)
                        Not Suitable for Lock-in, Velcro, magnets

                        gumdrop-hideaway-92.jpg

                        Gumdrop Hideaway iPad Air #92

                        • Screen opening: 7-7/8" x 5-7/8", 200 mm x 150 mm
                        • Outside dimensions: 9-13/16" x 7-1/16" x 3/4", 249 mm x 180 mm x 19 mm
                        • Silicone skin over ABS shell 
                        • Attached folding handle stand
                        • Available in a variety of colors
                        Best Attachment Snap-In or lock-in for permanent mounting
                        Possible Attachment Suction cups, suction tape, straps (last resort)
                        Not Suitable for Velcro, magnets

                        gumdrop-hideaway-94.png

                        Gumdrop Hideaway iPad Air 2/Pro 9.7 #94

                        • Screen opening: 8-1/2" x 5-7/8", 271 mm x 150 mm
                        • Outside dimensions: 9-13/16" x 7-1/8" x 5/8", 250 mm x 181 mm x 17 mm
                        • Silicone skin over ABS shell 
                        • Attached folding handle stand
                        • Available in a variety of colors
                        Best Attachment Snap-In or lock-in for permanent mounting
                        Possible Attachment Suction cups, suction tape, straps (last resort)
                        Not Suitable for Velcro, magnets

                        gumdrop-hideaway-111.png

                        Gumdrop Hideaway iPad 5th/6th Gen 9.7 #111A

                        • Screen opening: 8-5/8" x 6-1/8", 218 mm x 156 mm
                        • Outside dimensions: 9-7/8" x 7-1/8" x 3/4", 251 mm x 181 mm x 19 mm
                        • Silicone skin over ABS shell 
                        • Attached folding handle stand
                        • Available in a variety of colors
                        Best Attachment Snap-In or lock-in for permanent mounting
                        Possible Attachment Suction cups, suction tape, straps (last resort)
                        Not Suitable for Velcro, magnets

                        gumdrop-lock-down-89.png

                        Gumdrop Lock-Down iPad 5th/6th Gen 9.7 #89

                        • Screen opening: 8-7/8" x 6-1/16"
                        • Outside dimensions (with handle closed): 10-7/16" x 7-15/16" x 11/16", 265 mm x 202 mm x 18 mm
                        • Silicone skin over ABS shell 
                        • Attached folding handle stand
                        • Available in a variety of colors
                        Best Attachment Snap-In or lock-in for permanent mounting
                        Possible Attachment Suction tape, suction cups (on grids up to 20 cells), straps (last resort)
                        Not Suitable for Velcro, magnets
                        hde-screen-protector-105.png

                        HDE Dual Layer w/ Removable Screen Protector iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #105A

                          Sometimes called Dual Layer Shockproof Case or Kids Shockproof Bumper or Hard Cover Handle Stand.

                          • Screen opening: 7-15/16" x 5-15/16", 202 mm x 151 mm
                          • Outside dimensions (with handle): 10-3/4" x 10-11/16" x 13/16", 273 mm x 272 mm x 20 mm
                          • EVA foam case with polycarbonate frame  
                          • Camera and ambient light sensor openings may vary by iPad model
                          • Some versions have handle drilled for possible shoulder-strap attachment, some versions do not
                          • Comes in a variety of colors, including two-tone
                          Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
                          Possible Attachment Suction tape, straps (last resort)
                          Not Suitable for Magnets, suction cups

                          hde-shock-proof.png

                          HDE Shock Proof

                          The HDE Shock Proof, also called the HDE Kids Case, is a variant of the classic EVA folding handle stand. Do not confuse it with the HDE Shockproof Case with a built-in screen protector.

                          To order a keyguard for the HDE Shock Proof, choose the matching Classic EVA case above.


                          hde-folio-cover-106.png

                          HDE Vintage Folio Cover iPad 5th-6th Gen 9.7 #106A

                          Sometimes called Folding Leather Folio Case.

                          • Screen opening: 7-15/16" x 6", 202 mm x 152 mm
                          • Outside dimensions (case closed): 9-11/16" x 7-1/8" x 13/16", 247 mm x 181 mm x 21 mm
                          • Leather pocket surrounds iPad
                          • Outer folio/foding stand is often a different color, including some brightly colored patterns
                          Best Attachment Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change
                          Possible Attachment Suction tape, straps (last resort)
                          Not Suitable for Suction cups

                          protex-147.jpg

                          Higher Ground PROTEx Air, 5th-6th Gen 9.7 #147A

                          • Screen opening: 9-3/16" x 6-7/16", 234 mm x 163 mm
                          • Outside dimensions: 9-15/16" x 7-3/16" x 5/8", 254 mm x 183 mm x 15 mm
                          • Eight-sided rectangular camera opening with elastic button over home key
                          • Polycarbonate shell
                          Best Attachment
                          Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
                          Not Suitable for Lock-in, magnets, snap-in    
                          ho-371.jpg

                          HoCase iPad 5th-6th Gen 9.7 #371A

                          • Screen opening:  7-13/16" x 5-7/8", 198 mm x 149 mm
                          • Outside dimensions: 9-7/8" x 7-1/8" x 3/4", 250mm x 180 mm x 19 mm
                          • Built-in kickstand
                          • Hybrid shock absorbing silicone exterior and inner hard plastic bumper withstand accidental drops and falls.
                          Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
                          Possible Attachment Straps (last resort)
                          Not Suitable for Suction cups, suction tape, magnets

                          axtion-bold-69.jpg

                          Joy Factory aXtion Bold iPad 5th-6th Gen 9.7 #69A

                          This is a very expensive case whose only unique feature is a security cable that attaches with double-sided tape. If you want people to not bother stealing your iPad because it looks like it's secured to the table, this might be the case for you. Otherwise, there are many less expensive cases that provide the same or more protection to the iPad.

                          • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
                          • Outside dimensions (measured near the corners):  10-1/16" x 7-1/4" x 15/16", 255 mm x 184 mm x 23 mm  
                          • 360° rotating handle with small, flimsy stand
                          • Built-in screen protector
                          • High-quality silicone skin is difficult to seat over thin, flimsy frame
                          • Security cable taped to back of iPad is apparent theft deterrent
                          • Slotted corners for attaching shoulder strap (not included)
                          Best Attachment Snap-In or Lock-in for permanent mounting
                          Possible Attachment straps (last resort)
                          Not Suitable for Velcro, magnets, suction cups, suction tape

                          kayscase-kidbox.jpg

                          Kay's Case KidBox

                          The Kay's Case KidBox is a variant of the classic EVA folding handle stand.

                          To order a keyguard for the Kay's Case KidBox, choose the matching 

                          Classic EVA case above.


                          blackbelt-67b.jpg

                          Kensington Black Belt 1st Deg iPad Air 2 9.7 #67B

                          • Screen opening: 8-3/8" x 6-1/4", 212 mm x 160 mm
                          • Outside dimensions: 9-13/16" x 6-15/16" x 1/2", 249 mm x 177 mm x 12 mm
                          Best Attachment Nothing attaches a keyguard very securely to this case
                          Possible Attachment Snap-in, straps (last resort)
                          Not Suitable for Magnets, Velcro, suction cups, suction tape


                            kensington-331.png

                            Kensington Black Belt 2nd Deg iPad 5th-6th Gen 9.7 #331

                              • Screen opening: 9-3/8" x 6-9/16", 238 mm x 167 mm
                              • Outside dimensions: 9-15/16" x 6-5/8" x 3/4", 252 mm x 167 mm x 19 mm
                              • EVA foam case with screen protector in hard plastic frame
                              • Built in silicon handle strap
                              • Screen protector included
                              Best Attachment Velcro for quick change, suction cups, suction tape
                              Possible Attachment Straps (last resort)
                              Not Suitable for Magnets, snap-in or lock-in 


                              belt-82a.jpg

                              Kensington Black Belt 2nd Deg Rugged iPad Air 2 9.7 #82a

                                • Screen opening: 8-3/8" x 6-1/4", 213 mm x 159 mm
                                • Outside dimensions: 9-15/16" x 7-1/8" x 3/4", 252 mm x 181 mm x 19 mm
                                • EVA foam case with screen protector in hard plastic frame
                                • Built in silicon handle strap
                                • Screen protector included
                                Best Attachment Snap-In 
                                Possible Attachment Suction Tape, straps (last resort)
                                Not Suitable for Velcro, magnets, suction cups

                                kensington-171b.jpg

                                Kensington SafeGrip Rugged iPad Air 9.7 #171B

                                  • Screen opening: 9-1/8" x 6-3/8", 232 mm x 162 mm
                                  • Outside dimensions (including handle): 10-3/16" x 9-7/8" x 7/8", 259 mm x 250 mm x 22 mm
                                  • EVA foam case
                                  • Distinctive arched handle
                                  • Two folding plastic stands behind the lower corners
                                  Best Attachment Snap-In
                                  Possible Attachment Suction cups, suction tape, straps (last resort)
                                  Not Suitable for Lock-in, Velcro, magnets


                                  ken-107.png

                                  Kensington SafeGrip Rugged iPad Air 9.7 #107A

                                    • Screen opening: 9-1/8" x 6-3/8", 232 mm x 162 mm
                                    • Outside dimensions (including handle): 10-3/16" x 9-7/8" x 7/8", 259 mm x 250 mm x 22 mm
                                    • EVA foam case
                                    • Distinctive arched handle
                                    • Two folding plastic stands behind the lower corners
                                    Best Attachment Snap-In
                                    Possible Attachment Suction cups, suction tape, straps (last resort)
                                    Not Suitable for Lock-in, Velcro, magnets

                                    ledniceker-screen-protector-23.jpg

                                    Ledniceker Kids Case w/ Removable Screen Protector iPad 5th-6th Gen 9.7 #23

                                      There are similar-looking cases branded with different names, but this is the one with the removable screen protector.  This is NOT the one that comes with a tempered-glass screen protector that is permanently attached to the iPad.

                                      • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
                                      • Outside dimensions (including handle and corner stands): 10-3/8" x 9-5/8" x 1-3/8", 263 mm x 245 mm x 35 mm
                                      • EVA foam case with removable screen protector in hard plastic frame
                                      • Distinctive arched handle
                                      • Two folding plastic stands behind the lower corners
                                      • Comes in a variety of colors
                                      Best Attachment Snap-In
                                      Possible Attachment Suction cups, suction tape, straps (last resort)
                                      Not Suitable for Lock-in, Velcro, magnets

                                      ledniceker-24.jpg

                                      Ledniceker/SUPLIK Kids Case iPad Air/Air 2/Pro 9.7/5th-6th Gen #24

                                        There are similar-looking cases branded with different names, but this is the one that has no removable screen protector and no shoulder strap.  Some versions of this case come with a tempered glass screen protector instead of the removable one.

                                        • Screen opening: 9" x 6-1/4", 230 mm x 160 mm
                                        • Outside dimensions (including handle and corner stands): 10-1/4" x 9-5/8" x 1-1/4", 261 mm x 245 mm x 33 mm
                                        • EVA foam case
                                        • Distinctive arched handle
                                        • Two folding plastic stands behind the lower corners
                                        • Comes in a variety of colors
                                        Best Attachment Snap-In
                                        Possible Attachment Suction cups, suction tape, straps (last resort)
                                        Not Suitable for Lock-in, Velcro, magnets

                                        tirin-205b.jpg

                                        Ledniceker/LTROP/SUPLIK/TIRIN Robot Case iPad 5th/6th Gen 9.7 #76B

                                        There are similar-looking cases that should not be confused with this case, named differently by different brands.  This case has a banana-shaped opening under the top handle and cat's eye-shaped openings under the right and left handles.  The top handle is also the headphone strap for the robot on the back.  Some versions have cutouts in the top and bottom left corners for the ambient light sensors on certain models of the iPad 9.7.  Don't confuse this for the "Iron Man" case below.

                                        • Screen opening: 9" x 6-1/4", 228 mm x 159 mm
                                        • Outside dimensions (including handles and kick stand):  13-3/16" x 9-5/8" x 1-1/8", 335 mm x 244 mm x 29 mm
                                        • Headphone-wearing robot on back
                                        • Robot's legs fold out to become a stand
                                        • Comes with thin shoulder strap
                                        Best Attachment Snap-in or lock-in for permanent mounting 
                                        Possible Attachment Suction cups, suction tape, straps (last resort)
                                        Not Suitable for Lock-in, Velcro, magnets

                                        bmouo-112b.jpg

                                        Ledniceker/BMOUO Rotating Handle Stand iPad Air 2/Pro 9.7/9.7 5th-6th Gen 9.7 #112B

                                        This case is sold under several different brand names. Be careful not to confuse it with similar-looking cases. This one has the rotating handle centered on a big raised "curvy X".

                                        • Screen opening: 7-7/8" x5-15/16", 200 mm x 151 mm
                                        • Outside dimensions: 10-1/2" x 6-11/16" x 11/16 ", 266 mm x 196 mm x 25 mm
                                        • The home key is exposed to the screen opening by a trapezoidal cutout
                                        • Detachable shoulder strap
                                        • Available in different colors
                                        Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
                                        Possible Attachment Straps (last resort)
                                        Not Suitable for Suction cups, suction tape

                                        lifeproof-fre-183.jpg

                                        LifeProof FRĒ iPad Air #183

                                        • Screen opening: 9-1/16" x 6-1/8", 231 mm x 156 mm
                                        • Outside dimensions: 10-1/4" x 7-3/8" x 5/8", 261 mm x 187 mm x 16 mm 
                                        • Slight rounded notch in screen opening around home key (difficult to see in this picture.  Right-click, then choose "Open image in new tab" to see it.)
                                        • Silicone skin over polycarbonate shell
                                        • Available in black or white
                                        • Claims to be waterproof 
                                        • Very expensive
                                        Best Attachment Snap-in or lock-in for permanent mounting (breaks the waterproof seal), Velcro for quick change
                                        Possible Attachment Straps (last resort)
                                        Not Suitable for Suction cups, suction tape, magnets

                                        lifeproof-nuud-109.jpg

                                        LifeProof NÜÜD iPad Air #109A

                                        • Screen opening: 8-13/16" x 6-1/4", 225 mm x 159 mm
                                        • Outside dimensions: 10-5/16" x 7-3/8" x 9/16", 261 mm x 187 mm x 15 mm
                                        • Distinctive arched bulge around home key
                                        • Silicone skin over polycarbonate shell 
                                        • Available in black or white 
                                        • Claims to be waterproof 
                                        • Very expensive 
                                        Best Attachment Snap-In or lock-in for permanent mounting (breaks the waterproof seal), Velcro for quick change
                                        Possible Attachment Straps (last resort)
                                        Not Suitable for Suction cups, suction tape, magnets

                                        lifeproof-nuud-95.jpg

                                        LifeProof NÜÜD iPad Air 2 #95

                                        • Screen opening: 8-7/8" x 6-3/8", 226 mm x 162 mm
                                        • Outside dimensions: 10-1/16" x 7-1/4" x 9/16", 255 mm x 184 mm x 15 mm
                                        • Distinctive arched bulge around home key.  The top of the arch is slightly flattened, unlike the Air case #95 whose arch is fully rounded.
                                        • Silicone skin over polycarbonate shell 
                                        • Available in black or white 
                                        • Claims to be waterproof 
                                        • Very expensive 
                                        Best Attachment Snap-in or lock-in for permanent mounting (breaks the waterproof seal), Velcro for quick change
                                        Possible Attachment Straps (last resort)
                                        Not Suitable for Suction cups, suction tape, magnets

                                        lifeproof-nuud-88.png

                                        LifeProof NÜÜD iPad Pro 9.7 (not 9.7 5th/6th Gen) #88A

                                        • Screen opening: 8-3/4" x 6-1/8", 223 mm x 156 mm
                                        • Outside dimensions: 9-1/2" x 6-3/4" x 9/16", 242 mm x 172 mm x 14 mm
                                        • Distinctive flattened-arch bulge around home key
                                        • Silicone skin over polycarbonate shell 
                                        • Available in black or white 
                                        • Claims to be waterproof 
                                        • Very expensive 
                                        Best Attachment Snap-in or lock-in for permanent mounting (breaks the waterproof seal), Velcro for quick change
                                        Possible Attachment Straps (last resort)
                                        Not Suitable for Suction cups, suction tape, magnets

                                        luck-164.jpg

                                        Little Luck Folio iPad Air 9.7 #164

                                        • Screen opening: 8-1/16" x 6-3/8", 205 mm x 161 mm
                                        • Outside dimensions: 10-3/4" x 7-3/8" x 1/2", 273 mm x 187 mm x 12 mm
                                        • Distinctive arched bulge around home key
                                        Best Attachment Snap-In
                                        Possible Attachment Suction cups, suction tape, straps (last resort)
                                        Not Suitable for Lock-in, Velcro, magnets


                                        logitech-132.png

                                        Logitech Rugged Combo 2 iPad 5th-6th Gen 9.7 #132A

                                        • Screen opening: 9-1/4" x 6-3/8", 234 mm x 161 mm
                                        • Outside dimensions: 10-3/4" x 7-3/8" x 9/16", 273 mm x 187 mm x 14 mm
                                        • Distinctive arched bulge around home key
                                        • Silicone skin over polycarbonate shell 
                                        • Available in black or white 
                                        • Claims to be waterproof 
                                        • Very expensive 
                                        Best Attachment Snap-In
                                        Possible Attachment Suction cups, suction tape, straps (last resort)
                                        Not Suitable for Lock-in, Velcro, magnets

                                        avawo-455.jpg

                                        LTROP/BMOUO Football Case w/ Removable Screen Protector iPad Air/Air 2/Pro 9.7/5th Gen/6th Gen 9.7 #455

                                        This case is sold under a variety of brand names.  It's easy to spot because of the distinctive openings on the upper corners where a shoulder strap (not included) could be attached, and the large football embossed on the back.   Not to be confused with the similar case #23 above.

                                        You'll find this case on our "To Fit Case" list as the  BMOUO Football Case #455.


                                        ltrop-405.jpg

                                        LTROP "Iron Man" Case iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #425

                                        There are similar-looking cases that should not be confused for the "Iron Man" case.  This is not the  Robot Case listed above.  This case has a similar banana-shaped opening under the top handle and straighter openings under the right and left handles.  It has a figure on the back that looks more like Iron Man than a robot

                                        • Screen opening: 9" x 6-5/16", 229 mm x 160 mm
                                        • Outside dimensions (including handles and kick stand):  13-3/8" x 9-3/8" x 1-1/8", 338 mm x 237 mm x 29 mm
                                        • "Iron Man" shaped figure on the back
                                        • Legs fold out to become a stand
                                        • Shoulder strap
                                        Best Attachment Snap-in or lock-in for permanent mounting 
                                        Possible Attachment Suction cups, suction tape, straps (last resort)
                                        Not Suitable for Lock-in, Velcro, magnets

                                        maxc-185b.jpg

                                        MAXCases EXTREME Shield for iPad 5th-6th Gen 9.7 #185B

                                        • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
                                        • Outside dimensions: 9-15/16" x 7-3/16" x 3/4", 253 mm x 182 mm x 20 mm
                                        • Built-in screen protector
                                        Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
                                        Possible Attachment Straps (last resort)
                                        Not Suitable for Suction cups, suction tape, magnets

                                        max-372-1.png

                                        MAXCases Shield for iPad 5th-6th Gen 9.7 #372

                                        • Screen opening: 7-3/4" x 5-13/16/16", 198 mm x 148 mm
                                        • Outside dimensions: 10-1/16" x 7-11/16" x 3/4", 275 mm x 194 mm x 18 mm
                                        • Built-in screen protector
                                        Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
                                        Possible Attachment Straps (last resort)
                                        Not Suitable for Suction cups, suction tape, magnets

                                        miesherk-101b.jpg

                                        Miesherk Rotating Hand Strap iPad 5th-6th Gen 9.7. #101B

                                        • Screen opening: 7-7/8" x 5-7/8", 200 mm x 150 mm
                                        • Outside dimensions (not including rotating handle): 9-15/16" x 7-3/16" x 11/16", 253 mm x 182 mm x 18 mm
                                        • Stiff elastic TPU skin over 2-piece clip-together polycarbonate frame
                                        • Rotating Velcro hand strap
                                        • Optional shoulder strap
                                        • Apple Pencil holder on back
                                        • Comes in several colors
                                        Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
                                        Possible Attachment Elastic straps (last resort)
                                        Not Suitable for Suction cups, suction tape, magnets

                                        mobile-142b.jpg

                                        Mobile Demand X Case iPad 5th-6th Gen 9.7 #142B

                                        • Screen opening: 9-1/16" x 6-1/4", 230 mm x 159 mm
                                        • Outside dimensions: 9-11/16" x 6-15/16" x 1-1/16", 247 mm x 176 mm x 27 mm
                                        Best Attachment Snap-In or lock-in for permanent mounting
                                        Possible Attachment Suction Cups, suction tape, straps (last resort)
                                        Not Suitable for Magnets, Velcro


                                        monoprice-kidz-cover.jpg

                                        Monoprice Kidz Cover

                                        The Monoprice Kidz Cover is a variant of the classic EVA folding handle stand.

                                        To order a keyguard for the Monoprice Kidz Cover, choose the matching Classic EVA case above.


                                        mumba-112.jpg

                                        Mumba Kido 2 iPad 5th-6th Gen 9.7 #112A

                                        • Screen opening: 9-1/4" x 6-1/2", 235 mm x 165 mm
                                        • Outside dimensions: 10-1/4" x 7-3/4" x 5/8", 260 mm x 197 mm x 15 mm
                                        • Distinctive arched bulge around home key
                                        • Silicone skin over polycarbonate shell 
                                        • Available in black or white 
                                        • Claims to be waterproof 
                                        • Very expensive 
                                        Best Attachment Suction cups
                                        Possible Attachment Snap-in, suction tape, straps (last resort)
                                        Not Suitable for Lock-in, Velcro, magnets

                                        newstyle-shockproof.png

                                        NEWSTYLE Shockproof Light Weight

                                        NEWSTYLE Shockproof Light Weight is a variant of the classic EVA folding handle stand.

                                        To order a keyguard for the NEWSTYLE Shockproof Light Weight, choose the matching  Classic EVA case above.

                                         

                                         


                                        nocase9.7-0.jpg

                                        No Case for iPad 5th-6th Gen 9.7 #0

                                        When you order a keyguard for an iPad that is not in a case, choose "No Case" from the list of cases

                                        Best Attachment Velcro for quick change, suction cups, suction tape
                                        Possible Attachment Straps (last resort)
                                        Not Suitable for Magnets, snap-in or lock-in 


                                        noxm-182.jpg

                                        Noxm Rotating Handle iPad 5th-6th Gen 9.7 #182

                                        • Screen opening: 7-7/8" x 5-15/16", 200 mm x 150 mm
                                        • Outside dimensions: 9-7/8" x 7-1/8" x 3/4", 251 mm x 181 mm x 20 mm
                                        • Distinctive arched bulge around home key
                                        • Silicone skin over polycarbonate shell 
                                        • Available in black or white 
                                        • Claims to be waterproof  
                                        Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
                                        Possible Attachment Straps (last resort)
                                        Not Suitable for Suction cups, suction tape

                                        nut-188b.jpg

                                        NutKase Rugged iPad 5th-6th Gen 9.7. #188B

                                          • Screen opening: 8-7/8" x 6-1/16", 225 mm x 154 mm
                                          • Outside dimensions: 10-1/4" x 6-1/16" x 5/8", 261 mm x 154 mm x 15 mm
                                          Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
                                          Possible Attachment Suction tape, straps (last resort)
                                          Not Suitable for Magnets, suction cups

                                          otterbox-defender-139.png

                                          Otterbox Defender iPad Air/Air 2/Pro 9.7 #139

                                          Don't confuse this with case #321 below. The screen openings are nearly identical in size and the only way to tell them apart is by the shape of the home button and camera openings.

                                          • Screen opening:  7-15/16" x 6", 202 mm x 153 mm
                                          • Outside dimensions: 9-13/16" x 7-1/16" x 5/8", 250 mm x 180 mm x 16 mm
                                          • Funky clip-on back piece removes to become a huge folding stand
                                          • Elastic skin over 2-part polycarbonate frame
                                          • Camera opening is trapezoidal, taller and narrower than case #321 below
                                          • Home key is covered by an extension of the elastic outer skin
                                          Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
                                          Possible Attachment Straps (last resort)
                                          Not Suitable for Suction cups, suction tape, magnets     

                                          otterbox-321.jpg

                                          Otterbox Defender iPad 5th-6th Gen 9.7 #321

                                          Don't confuse this with case #139 above. The screen openings are nearly identical in size and the only way to tell them apart is by the shape of the home button and camera openings.

                                          • Screen opening:  7-15/16" x 6", 202 mm x 152 mm
                                          • Outside dimensions (without stand): 9-13/16" x 7-1/16" x 5/8", 250 mm x 180 mm x 17 mm
                                          • Funky clip-on back piece removes to become a huge folding stand
                                          • Elastic skin over 2-part polycarbonate frame
                                          • Camera opening is trapezoidal, shorter and wider than case #139 above
                                          • Home key is exposed to the screen opening by a rounded V-shaped cutout
                                          Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
                                          Possible Attachment Straps (last resort)
                                          Not Suitable for Suction cups, suction tape, magnets

                                          Otterbox Universe iPad Air 2/Pro 9.7 #161

                                          • Screen opening:  9-1/4" x 6-1/2", 236 mm x 166 mm
                                          • Outside dimensions: 9-3/4" x 6-15/16" x 9/16", 247 mm x 177 mm x 14 mm
                                          • Polycarbonate shell with hard flexible rim to hold iPad. Rim is open at the home key end.
                                          Best Attachment
                                          Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
                                          Not Suitable for Lock-in, magnets, snap-in

                                          otterbox-348.jpg

                                          Otterbox Unlimited iPad 5th-6th Gen 9.7 #348

                                          • Screen opening:  8-7/8" x 6-1/8", 226 mm x 155 mm
                                          • Outside dimensions: 9-13/16" x 7" x 9/16", 249 mm x 179 mm x 14 mm
                                          • Polycarbonate shell with hard flexible rim to hold iPad. Rim is open at the home key end.
                                          Best Attachment Snap-In or Lock-in for permanent mounting
                                          Possible Attachment Suction cups, suction tape, straps (last resort)
                                          Not Suitable for Velcro, magnets


                                          pep-373.jpg

                                          Pepkoo/Feitenn iPad 5th-6th Gen 9.7 #373

                                          • Screen opening: 7-13/16" x 5-9/16", 198 mm x 149 mm
                                          • Outside dimensions: 9-15/16" x 7-3/16" x 11/16", 253 mm x 183 mm x 18 mm
                                          • Nice silicone skin over really cheap two-piece shell
                                          • Comes apart at the drop of the hat. A 3-year-old could do it!
                                          • Will safely hold an iPad until you drop it
                                          Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
                                          Possible Attachment Straps (last resort)
                                          Not Suitable for Suction cups, suction tape


                                          pepkoo-198b.jpg

                                          PEPKOO Ring Handle Stand iPad 5th-6th Gen 9.7 #198

                                          • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
                                          • Outside dimensions: 10-3/16" x 7-11/16" x 1-1/16", 260 mm x 197 mm x 28 mm 
                                          • Removable screen bezel makes for convenient mounting of keyguard
                                          • Goofy round stand is actually not as tippy as it looks
                                          Best Attachment Snap-In or lock-in for permanent mounting
                                          Possible Attachment Velcro for quick change, straps (last resort)
                                          Not Suitable for Suction cups, suction tape, magnets


                                          pixiu-117.jpg

                                          PIXIU Rugged Defender iPad 5th-6th Gen 9.7 #117A

                                          • Screen opening:  7-13/16" x 5-7/8", 198 mm x 150 mm
                                          • Outside dimensions: 9-15/16" x 7-1/8" x 13/16", 252 mm x 181 mm x 20 mm
                                          • Polycarbonate shell with hard flexible rim to hold iPad. Rim is open at the home key end.
                                          Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
                                          Possible Attachment Straps (last resort)
                                          Not Suitable for Suction cups, suction tape, magnets    

                                          poetic-101a.jpg

                                          Poetic Revolution iPad 5th-6th Gen 9.7. #101A

                                          • Screen opening: 8-1/8" x 6-3/16", 206 mm x 157 mm
                                          • Outside dimensions: 9-7/8" x 7-1/16" x 11/16", 250 mm x 180 mm x 16 mm
                                          • Stiff elastic TPU skin over 2-piece clip-together polycarbonate frame
                                          • Folding stand on back
                                          Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
                                          Possible Attachment Elastic straps (last resort)
                                          Not Suitable for Suction cups, suction tape, magnets

                                          procase-153b.jpg

                                          ProCase Corner Bumper Case iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #153B

                                          ProCase sells several cases on Amazon as the "Kids Case", including this one.  Do not confuse this case for any of those others.  In particular, people often confuse this case for the  Classic EVA case with the folding handle.  This one you'll find on our "To Fit Case" list as the ProCase Corner Bumper Case #153B.

                                          • Screen opening: 9" x 6-1/4", 229 mm x 159 mm
                                          • Outside dimensions (including handle and kick stand): 10-13/16" x 9-3/16" x 15/16", 275 mm x 233 mm x 24 mm
                                          • Folding stand on back
                                          • Funky bumpers on the corners
                                          Best Attachment Snap-in for permanent mounting 
                                          Possible Attachment Suction cups, suction tape, straps (last resort)
                                          Not Suitable for Lock-in, Velcro, magnets

                                          procase-353.jpg

                                          ProCase Ultra Slim iPad 5th-6th Gen 9.7 #353A

                                          • Screen opening:  9-7/16" x 6-5/8", 240 mm x 169 mm
                                          • Outside dimensions: 9-1/2" x 6-3/4" x 1/2", 241 mm x 172 mm x 13 mm
                                          • Polycarbonate shell with hard flexible rim to hold iPad. Rim is open at the home key end.
                                          • Comes in a variety of colors
                                          Best Attachment
                                          Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
                                          Not Suitable for Lock-in, magnets, snap-in



                                          pure-sense-buddy.png

                                          Pure Sense Buddy

                                          Pure Sense Buddy is a variant of the classic EVA folding handle stand. It's different in that it includes a thin shoulder strap and an anti-microbial surface.

                                          To order a keyguard for the Pure Sense Buddy, choose the matching  Classic EVA case above.


                                          ram-ez-rollr.png

                                          RAM EZ-Roll'r iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #122

                                          While not really an iPad case, we do make keyguards for iPads mounted in the EZ Roll'r.  The EZ-Roll'r clips to the two corners on one end of the iPad and to the center of the opposite end.  The EZ-Roll'r attaches to the standard RAM Mount hardware like suction cups, ball-and-socket joints, and flexible arms.

                                          Best Attachment
                                          Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
                                          Not Suitable for Lock-in, magnets, snap-in

                                          rantice-332b-copy.jpg

                                          Rantice Hybrid Kickstand iPad 5th-6th Gen 9.7 #332B

                                          • Screen opening:  7-7/8" x 5-15/16", 200 mm x 151 mm
                                          • Outside dimensions: 9-15/16" x 7-1/16" x 3/4", 253 mm x 180 mm x 19 mm
                                          • Polycarbonate shell with hard flexible rim to hold iPad. Rim is open at the home key end.
                                          • Comes in a variety of colors
                                          Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
                                          Possible Attachment Straps (last resort)
                                          Not Suitable for Suction cups, suction tape, magnets

                                          ultimate-ii.jpg

                                          RJ Cooper Ultimate II

                                          The Ultimate II is a variant of the classic EVA folding handle stand. RJ Cooper's version adds a shoulder strap and a more sturdy stand.

                                          To order a keyguard for the Ultimate II, choose the matching  Classic EVA case above.


                                          roiskin-130b.jpg

                                          ROISKIN Rotating Ring Stand iPad Air 2/Pro 9.7/5th-6th Gen 9.7 #130B

                                          • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
                                          • Outside dimensions (including ring stand): 10-1/8" x 7-3/8" x 1-1/4", 257 mm x 187 mm x 33 mm
                                          • Flexible TPU skin over polycarbonate shell
                                          • Removable front clip makes for easy attachment of keyguard
                                          • Rotating ring handle/stand
                                          • Shoulder strap
                                          Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
                                          Possible Attachment Straps (last resort)
                                          Not Suitable for Suction cups, suction tape

                                          roocase-kidarmor.jpg

                                          Roocase KidArmor

                                          The Roocase KidArmor is a variant of the classic EVA folding handle stand. 

                                          To order a keyguard for the Roocase KidArmor, choose the matching  Classic EVA case above.


                                          pro-lock-103a.jpg

                                          RUG-ED ProLock iPad Air/5th-6th Gen 9.7 #103A

                                          • Screen opening: 9" x  6-3/16", 228 mm x 157 mm
                                          • Outside dimensions (with handle): 11-3/16" x 7-3/4" x 11/16", 284 mm x 197 mm x 18 mm
                                          Best Attachment Snap-in or lock-in for permanent mounting, 
                                          Possible Attachment Suction cups, suction tape, Velcro, straps (last resort)
                                          Not Suitable for Magnets



                                          Rugged Protection PREVENTOR 5 iPad 5th-6th Gen 9.7 #163

                                          • Screen opening:  7-7/8" x 6", 201 mm x 152 mm
                                          • Outside dimensions: 9-13/16" x 7" x 11/16", 249 mm x 178 mm x 17 mm
                                          • 2-piece polycarbonate shell with silicone skin.
                                          • Built-in screen protector.
                                          • Folding stand
                                          Best Attachment Snap-in or lock-in for permanent mounting, 
                                          Possible Attachment Straps (last resort)
                                          Not Suitable for Suction cups, suction tape, Velcro, magnets

                                          seymac-124.jpg

                                          SEYMAC 3-Layer Smart Cover iPad 5th-6th Gen 9.7 #124

                                          • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
                                          • Outside dimensions (without smart cover): 9-7/8" x 7-3/8" x 11/16", 251 mm x 187 mm x 17 mm
                                          • Flexible tough polyurethane skin over tough polyurethane hard shell
                                          • Polyurethane leather folding magnetic "smart cover"
                                          Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
                                          Possible Attachment Straps (last resort)
                                          Not Suitable for Suction cups, suction tape, magnets

                                          seymac-stock-143b.png

                                          SEYMAC Stock iPad 5th-6th Gen 9.7 #143B

                                          SEYMAC makes several different cases with similar appearance and similar names. This is not the one with the rotating handle stand on the back, nor is it the one with the magnetic "smart cover". This is the one with folding stand on the back and the flimsy plastic bezel that barely clips on to the front.

                                          • Screen opening: 7-7/8" x 6", 200 mm x 152 mm
                                          • Outside dimensions: 10-1/8" x 7-3/8" x 3/4", 257 mm x 188 mm x 19 mm
                                          • Nice silicone skin over really cheap two-piece shell
                                          • Extremely thin shoulder strap
                                          • Back is semi-transparent with a folding non-adjustable stand in the middle - stand does not rotate
                                          Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
                                          Possible Attachment Straps (last resort)
                                          Not Suitable for Suction cups, suction tape

                                          seymac-356.jpg

                                          SEYMAC Rotating Hand Strap iPad 5th-6th Gen 9.7 #356

                                          SEYMAC makes several different cases with similar appearance and similar names. This is not the one with only a stand on the back, nor is it the one with the magnetic "smart cover". This is the one with the rotating handle stand.

                                          • Screen opening: 7-7/8" x 5-15/16", 200 mm x 152 mm
                                          • Outside dimensions: 10-1/8" x 7-5/16" x 13/16", 258 mm x 187 mm x 21 mm
                                          • Nice silicone skin over thin two-piece shell
                                          • Thin shoulder strap
                                          • Rotating handle-stand
                                          • Easiest rigid case to insert and remove iPad
                                          • Affordable - the best value among rigid cases
                                          Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
                                          Possible Attachment Straps (last resort)
                                          Not Suitable for Suction cups, suction tape

                                          shellbox-363.jpg

                                          ShellBox iPad 5th-6th Gen 9.7 #149B

                                          • Screen opening: 9-1/16" x 6-5/16", 231 mm x 161 mm
                                          • Outside dimensions: 9-15/16" x 7-3/16" x 5/8", 253 mm x 182 mm x 16 mm
                                          • Includes built-in screen protector
                                          • Comes with ultra-flimsy stick-on folding stand
                                          • Comes with thin shoulder strap attached by a heavy thread
                                          • Claims to be waterproof and water resistant??
                                          • Rear panel attaches two ways so you can easily block the rear camera when you want to take black pictures.
                                          Best Attachment Snap-in or lock-in for permanent mounting, 
                                          Possible Attachment Suction cups, suction tape, Velcro, straps (last resort)
                                          Not Suitable for magnets

                                          speck-37.png

                                          Speck iGuy iPad Air 9.7 #37A

                                          • Screen opening: 9-1/8" x 6-3/8", 232 mm x 162 mm
                                          • Outside dimensions (with handles and stand): 14-7/16" x 8-11/16" x 15/16", 363 mm x 220 mm x 24 mm
                                          • Eight-sided rectangular camera opening with elastic button over home key
                                          • Polyurethane skin over polycarbonate shell
                                          • Pro version includes built-in screen protector
                                          • Easiest rigid case to insert and remove iPad
                                          • Affordable - the best value among rigid cases
                                          Best Attachment

                                          Snap-in or lock-in for permanent mounting

                                          Possible Attachment Suction cups, suction tape, straps (last resort)
                                          Not Suitable for Velcro, magnets

                                          stm-187.jpg

                                          STM DUX iPad 5th-6th Gen 9.7 #187A

                                          • Screen opening: 9-1/4" x 6-7/16", 236 mm x 164 mm
                                          • Outside dimensions: 9-11/16" x 7" x 9/16", 245 mm x 177 mm x 15 mm
                                          • Eight-sided rectangular camera opening with elastic button over home key
                                          • Polyurethane skin over polycarbonate shell
                                          • Pro version includes built-in screen protector
                                          • Easiest rigid case to insert and remove iPad
                                          • Affordable - the best value among rigid cases
                                          Best Attachment None are really great with this case
                                          Possible Attachment Snap-in, suction cups, suction tape, straps (last resort)
                                          Not Suitable for Lock-in, Velcro, magnets


                                          ledniceker-screen-protector-23.jpg

                                          SUPLIK Case for Kids with Built-In Screen Protector #23

                                          This case is sold under a variety of names. It is the same as the Ledniceker Kids Case with the built-in removable screen protector.

                                          To order a keyguard for the SUPLIK case with the removable screen protector, choose the matching Ledniceker Kids Case with Built-In Screen Protector above.


                                          suplik-447.jpg

                                          SUPLIK Folding Handle w/ Built-in Screen Protector iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #447

                                            Not to be confused with the  Classic EVA case above or the HDE screen protector case above.  This one is distinguished by the distinctive strap holes in the corners of the folding handle.

                                            • Screen opening: 7-7/8" x 6", 200 mm x 152 mm
                                            • Outside dimensions (with handle): 10-11/16" x 10-13/16" x 15/16", 271 mm x 275 mm x 23 mm
                                            • Tough EVA foam case with polycarbonate frame  
                                            • Built-in screen protector
                                            • Folding handle becomes stand
                                            • Holes for attaching shoulder strap (not included)
                                            • Comes in a variety of colors
                                            Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
                                            Possible Attachment Suction tape, straps (last resort)
                                            Not Suitable for Magnets, suction cups

                                            ledniceker-kids-24.jpg

                                            SUPLIK Shockproof Handle Bumper Stand #24

                                            This case is sold under a variety of names. It is the same as the Ledniceker Kids Case. This is NOT the one with the built-in removable screen protector.

                                            To order a keyguard for the SUPLIK Bumper Stand, choose the matching Ledniceker Kids Case above.



                                            sxtech-118.png

                                            SxTech/SEYMAC Rotating Handle Stand iPad 5th-6th Gen 9.7 #356

                                              This case is sold under a variety of brand names.  You will not find it on our "Fit to Case" list.  To order a keyguard to fit this case, specify the  SEYMAC case #356, instead.

                                              • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
                                              • Outside dimensions: 10-1/8" x 7-5/16" x 13/16", 258 mm x 186 mm x 21 mm
                                              • Eight-sided rectangular camera opening with elastic button over home key
                                              • Polyurethane skin over polycarbonate shell
                                              • Pro version includes built-in screen protector
                                              • Easiest rigid case to insert and remove iPad
                                              • Affordable - the best value among rigid cases
                                              Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
                                              Possible Attachment Straps (last resort)
                                              Not Suitable for Suction cups, suction tape

                                              tab-177.jpg

                                              TabPow Rugged Triple Layer 9.7 #177

                                              • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
                                              • Outside dimensions: 9-15/16" x 7-1/8" x 5/8", 251 mm x 181 mm x 16 mm
                                              • Eight-sided rectangular camera opening with elastic button over home key
                                              • Polyurethane skin over polycarbonate shell
                                              • Pro version includes built-in screen protector
                                              • Easiest rigid case to insert and remove iPad
                                              • Affordable - the best value among rigid cases
                                              Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
                                              Possible Attachment Straps (last resort)
                                              Not Suitable for Suction cups, suction tape, magnets

                                               

                                              tech-113.jpg

                                              Tech21 EVO Play iPad Air/Air 2 9.7 #113A

                                              • Screen opening: 9-1/8" x 6-3/8", 232 mm x 161 mm
                                              • Outside dimensions (with handle): 10-5/16" x 7-1/2" x 1", 262 mm x 190 mm x 25 mm
                                              • Built-in handle
                                              • The case is soft and squishy.
                                              Best Attachment

                                              Snap-in

                                              Possible Attachment Suction cups, suction tape, lock-in, straps (last resort)
                                              Not Suitable for Velcro, magnets

                                              temdan-344.jpg

                                              Temdan Waterproof iPad 5th-6th Gen 9.7 #344

                                              • Screen opening: 9-3/16" x 6-7/16", 234 mm x 163 mm
                                              • Outside dimensions: 9-15/16" x 7-1/8" x 9/16", 252 mm x 181 mm x 15 mm
                                              • Eight-sided rectangular camera opening with elastic button over home key
                                              • Polyurethane skin over polycarbonate shell
                                              • Pro version includes built-in screen protector
                                              • Easiest rigid case to insert and remove iPad
                                              • Affordable - the best value among rigid cases
                                              Best Attachment Snap-in or lock-in for permanent mounting (breaks the waterproof seal)      
                                              Possible Attachment Suction cups, suction tape, Velcro, straps (last resort)
                                              Not Suitable for magnets

                                              sxtech-118.png

                                              TimeCity/SEYMAC Rotating Handle Stand iPad 5th-6th Gen 9.7 #356

                                                This case is sold under a variety of brand names.  You will not find it on our "Fit to Case" list.  To order a keyguard to fit this case, specify the  SEYMAC case #356, instead.

                                                • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
                                                • Outside dimensions: 10-1/8" x 7-5/16" x 13/16", 258 mm x 186 mm x 21 mm
                                                • Eight-sided rectangular camera opening with elastic button over home key
                                                • Polyurethane skin over polycarbonate shell
                                                • Pro version includes built-in screen protector
                                                • Easiest rigid case to insert and remove iPad
                                                • Affordable - the best value among rigid cases
                                                Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
                                                Possible Attachment Straps (last resort)
                                                Not Suitable for Suction cups, suction tape

                                                tirin-328.jpg

                                                TIRIN Kids Case iPad 5th-6th Gen 9.7 #328

                                                • Screen opening: 8-15/16" x 6-1/4", 227 mm x 160 mm
                                                • Outside dimensions (with handles): 12-15/16" x 9-9/16" x 15/16", 329 mm x 245 mm x 24 mm
                                                • Eight-sided rectangular camera opening with elastic button over home key
                                                • Polyurethane skin over polycarbonate shell
                                                • Pro version includes built-in screen protector
                                                • Easiest rigid case to insert and remove iPad
                                                • Affordable - the best value among rigid cases
                                                Best Attachment

                                                Snap-in or lock-in for permanent mounting

                                                Possible Attachment Suction cups, suction tape, straps (last resort)
                                                Not Suitable for Velcro, magnets

                                                tobii-46.png

                                                Tobii-Dynavox Speech Case w/ Keyguard Holder iPad 5th-6th Gen 9.7 #46A

                                                There are two versions of the Speech Case keyguard holder out there for the 9.7" iPad.  They appear identical, and the only way to tell them apart is to measure the screen opening.

                                                This one is version "A":

                                                • Screen opening: 7-9/16" x 6-1/8", 202 mm x 156 mm
                                                • Outside dimensions: 10" x 7-3/16", 251 mm x 182 mm 
                                                • Keyguard Holder snaps over front of Speech Case
                                                Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
                                                Possible Attachment Straps (last resort)
                                                Not Suitable for Suction cups, suction tape, magnets     

                                                tobii-46.png

                                                Tobii-Dynavox Speech Case w/ Keyguard Holder iPad 5th-6th Gen 9.7 #46B

                                                There are two versions of the Speech Case keyguard holder out there for the 9.7" iPad.  They appear identical, and the only way to tell them apart is to measure the screen opening.

                                                This one is version "B":

                                                • Screen opening: 8-1/16" x 6-1/8", 204 mm x 156 mm
                                                • Outside dimensions: 10" x 7-3/16", 251 mm x 182 mm 
                                                • Keyguard Holder snaps over front of Speech Case
                                                Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
                                                Possible Attachment Straps (last resort)
                                                Not Suitable for Suction cups, suction tape, magnets     

                                                topesct-86.jpg

                                                TopEsct Silicone Handle Stand iPad Air 9.7 #86

                                                • Screen opening: 8-3/8" x 6-1/8", 213 mm x 156 mm
                                                • Outside dimensions (with handles): 12" x 8-1/4" x 11/16", 304 mm x 210 mm x 18 mm
                                                • Eight-sided rectangular camera opening with elastic button over home key
                                                • Polyurethane skin over polycarbonate shell
                                                • Pro version includes built-in screen protector
                                                • Easiest rigid case to insert and remove iPad
                                                • Available in several colors
                                                • Affordable - the best value among rigid cases
                                                Best Attachment

                                                Snap-in or lock-in for permanent mounting

                                                Possible Attachment Suction cups, suction tape, straps (last resort)
                                                Not Suitable for Velcro, magnets

                                                topsky-336.jpg

                                                TOPSKY/BENTOBEN iPad Air/Air 2 9.7 #336

                                                • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
                                                • Outside dimensions: 9-15/16" x 7-1/8" x 11/16", 252 mm x 181 mm x 18 mm
                                                • Eight-sided rectangular camera opening with elastic button over home key
                                                • Polyurethane skin over polycarbonate shell
                                                • Pro version includes built-in screen protector
                                                • Easiest rigid case to insert and remove iPad
                                                • Available in several colors
                                                • Affordable - the best value among rigid cases
                                                Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
                                                Possible Attachment Straps (last resort)
                                                Not Suitable for Suction cups, suction tape, magnets

                                                travellor-kido.jpg

                                                Travellor Kido

                                                The Travellor Kido is a variant of the classic EVA folding handle stand. 

                                                To order a keyguard for the Travellor Kido, choose the matching  Classic EVA case above.


                                                trident-104.jpg

                                                Trident Aegis iPad Air 9.7 #104

                                                • Screen opening: 8-3/8" x 6", 213 mm x 152 mm
                                                • Outside dimensions: 9-3/4" x 7" x 9/16", 248 mm x 178 mm x 15 mm
                                                • Eight-sided rectangular camera opening with elastic button over home key
                                                • Polyurethane skin over polycarbonate shell
                                                • Pro version includes built-in screen protector
                                                • Easiest rigid case to insert and remove iPad
                                                • Available in several colors
                                                • Affordable - the best value among rigid cases
                                                Best Attachment Snap-in or lock-in for permanent mounting
                                                Possible Attachment Straps (last resort)
                                                Not Suitable for Suction cups, suction tape, Velcro, magnets

                                                trident-195.jpg

                                                Trident Kraken AMS Handle iPad Air 2/5th-6th Gen 9.7 #195A

                                                • Screen opening: 7-15/16" x 6-1/16", 201 mm x 154 mm
                                                • Outside dimensions (with handle): 10" x 9-7/16" x 9/16", 255 mm x 239 mm x 15 mm
                                                • Eight-sided rectangular camera opening with elastic button over home key
                                                • Polyurethane skin over polycarbonate shell
                                                • Pro version includes built-in screen protector
                                                • Easiest rigid case to insert and remove iPad
                                                • Available in several colors
                                                • Affordable - the best value among rigid cases
                                                Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
                                                Possible Attachment Straps (last resort)
                                                Not Suitable for Suction cups, suction tape

                                                ablenet-127.png

                                                Trident Kracken iPad Air 9.7 #127

                                                • Screen opening: 8" x 6-3/16", 203 mm x 155 mm
                                                • Outside dimensions: 9-15/16" x 7-9/16" x 9/16", 252 mm x 193 mm x 15 mm 
                                                • Hard plastic case
                                                • Built in rotating handle stand
                                                • Comes with straps
                                                Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
                                                Possible Attachment Straps (last resort)
                                                Not Suitable for Suction cups, suction tape

                                                braecn-heavy-duty-184.jpg

                                                TSQ/BRAECN Rotating Handle Stand iPad Air 2/Pro 9.7/5th-6th Gen 9.7. #184

                                                This case is sold on Amazon under many different names, and even different listings call it different things.  But it's easy to identify this case by the giant "X" on the back, the rotating Velcro hand strap, and the delicate shoulder strap.

                                                When ordering this case, you won't find it on our "To Fit Case" list. Instead, choose the BRAECN Rotating Handle Stand #184.

                                                • Screen opening: 7-7/8" x 5-5/16", 200 mm x 151 mm
                                                • Outtside dimension (Without rotating stand): 9-3/4" x 7-1/16" x 13/16", 248 mm x 178 mm x 21 mm
                                                • Nice silicone skin over the flimsiest two-piece breakable plastic shell imaginable
                                                • Thin fabric shoulder strap with extremely thin metal or plastic clips, depending on the brand
                                                • Off-center folding stand makes it easy to tip over
                                                • Conveniently comes apart if you drop it for easy access to the iPad
                                                • Kids can take it apart with one hand. No kidding.
                                                Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
                                                Possible Attachment Straps (last resort)
                                                Not Suitable for Suction cups, suction tape

                                                uag-121.jpg

                                                UAG Metropolis iPad Air 9.7 #121a

                                                • Screen opening: 9-5/16" x 6-9/16", 237 mm x 167 mm
                                                • Outside dimensions: 9-13/16" x 7" x 5/8", 249 mm x 178 mm x 16 mm
                                                • Eight-sided rectangular camera opening with elastic button over home key
                                                • Polyurethane skin over polycarbonate shell
                                                • Pro version includes built-in screen protector
                                                • Easiest rigid case to insert and remove iPad
                                                • Available in several colors
                                                • Affordable - the best value among rigid cases
                                                Best Attachment
                                                Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
                                                Not Suitable for Lock-in, magnets, snap-in

                                                unicorn-beetle-136.png

                                                Unicorn Beetle iPad Air 9.7 #136

                                                • Screen opening: 8-1/16" x 6-1/16", 204 mm x 155 mm
                                                • Outside dimensions: 9-7/8" x 7-1/8" x 5/8", 251 mm x 181 mm x 15 mm
                                                • Eight-sided rectangular camera opening with elastic button over home key
                                                • Polyurethane skin over polycarbonate shell
                                                • Pro version includes built-in screen protector
                                                • Easiest rigid case to insert and remove iPad
                                                • Available in several colors
                                                • Affordable - the best value among rigid cases
                                                Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
                                                Possible Attachment Straps (last resort)
                                                Not Suitable for Suction cups, suction tape, magnets

                                                unicorn-beetle-91.jpg

                                                Unicorn Beetle iPad Air 2 9.7 #63B

                                                • Screen opening: 7-7/8" x 6", 200 mm x 152 mm
                                                • Outside dimensions: 9-7/8" x 7-1/8" x 9/16", 251 mm x 181 mm x 14 mm
                                                • Oval or rectangular camera opening with two small round or rhomboid openings for ambient light sensors
                                                • Home key is exposed to the screen opening by a rounded trapezoidal notch
                                                • Polyurethane skin over polycarbonate shell
                                                • Pro version includes built-in screen protector
                                                • Pro 9.7 version has attached folding stand
                                                • Easiest rigid case to insert and remove iPad
                                                • Available in several colors
                                                • Affordable - the best value among rigid cases
                                                Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
                                                Possible Attachment Straps (last resort)
                                                Not Suitable for Suction cups, suction tape, magnets

                                                unicorn-91.png

                                                Unicorn Beetle iPad Air 2/Pro 9.7 #91

                                                • Screen opening: 7-15/16" x 6", 201 mm x 153 mm
                                                • Outside dimensions: 9-3/4" x 7" x 5/8", 253 mm x 177 mm x 15 mm
                                                • Oval or rectangular camera opening with two small round or rhomboid openings for ambient light sensors
                                                • Home key is exposed to the screen opening by a rounded trapezoidal notch
                                                • Polyurethane skin over polycarbonate shell
                                                • Pro version includes built-in screen protector
                                                • Pro 9.7 version has attached folding stand
                                                • Easiest rigid case to insert and remove iPad
                                                • Available in several colors
                                                • Affordable - the best value among rigid cases
                                                Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
                                                Possible Attachment Straps (last resort)
                                                Not Suitable for Suction cups, suction tape, magnets

                                                unicorn-beetle-108.png

                                                Unicorn Beetle Pro iPad 5th/6th Gen 9.7 #108

                                                • Screen opening: 8-1/16" x 6-3/16", 205 mm x 158 mm
                                                • Outside dimensions: 9-7/8" x 7-1/16" x 5/8", 250 mm x 179 mm x 16 mm
                                                • Oval camera opening
                                                • Home key is exposed to the screen opening by a trapezoidal notch
                                                • Polyurethane skin over polycarbonate shell
                                                • Built-in screen protector
                                                • Attached folding stand
                                                • Easiest rigid case to insert and remove iPad
                                                • Available in several colors
                                                • Affordable - the best value among rigid cases
                                                Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
                                                Possible Attachment Straps (last resort)
                                                Not Suitable for Suction cups, suction tape, magnets

                                                uzbl-89.jpg

                                                UZBL AirWave 5th-6th Gen 9.7. #83B

                                                This is a very expensive case whose only unique feature is a security cable that attaches with double-sided tape. If you want people to not bother stealing your iPad because it looks like it's secured to the table, this might be the case for you. Otherwise, there are many less expensive cases that provide the same or more protection to the iPad.

                                                • Screen opening: 8" x 6", 203 mm x 153 mm
                                                • Outside dimensions:  10-1/8" x 7-1/4" x 5/8", 257 mm x 184 mm x 16 mm  
                                                Best Attachment Snap-In 
                                                Possible Attachment Straps (last resort)
                                                Not Suitable for Velcro, magnets, suction cups, suction tape

                                                uzbl-361.jpg

                                                UZBL Cushy Case iPad 5th/6th Gen 9.7 #361B

                                                • Screen opening: 7-7/8" x 5-15/16", 199 mm x 151 mm
                                                • Outside dimensions: 10-1/4" x 7-9/16" x 1-5/16", 260 mm x 192 mm x 33 mm
                                                • Oval camera opening
                                                • Home key is exposed to the screen opening by a trapezoidal notch
                                                • EVA case foam 
                                                • Built-in screen protector
                                                • Attached folding stand
                                                • Easiest rigid case to insert and remove iPad
                                                Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
                                                Possible Attachment Straps (last resort)
                                                Not Suitable for Suction cups, suction tape, magnets

                                                uzbl-103b.png

                                                UZBL Rugged Slim Folio iPad 5th/6th Gen 9.7 #103B

                                                • Screen opening: 9-1/16" x 6-7/16", 231 mm x 163 mm
                                                • Outside dimensions: 9-7/8" x 7" x 5/8", 250 mm x 178 mm x 16 mm
                                                • Oval camera opening
                                                • Home key is exposed to the screen opening by a trapezoidal notch
                                                • Polyurethane skin over polycarbonate shell
                                                • Built-in screen protector
                                                • Attached folding stand
                                                • Easiest rigid case to insert and remove iPad
                                                • Available in several colors
                                                • Affordable - the best value among rigid cases
                                                Best Attachment
                                                Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
                                                Not Suitable for Lock-in, magnets, snap-in

                                                uzbl-85.jpg

                                                UZBL ShockWave iPad Air 2 9.7 #85

                                                • Screen opening: 7-15/16" x 6", 202 mm x 152 mm
                                                • Outside dimensions: 10-3/16" x 7-11/16" x 11/16", 259 mm x 196 mm x 18 mm
                                                • Oval camera opening
                                                • Home key is exposed to the screen opening by a trapezoidal notch
                                                • EVA case foam 
                                                • Built-in screen protector
                                                • Attached folding stand
                                                • Easiest rigid case to insert and remove iPad
                                                • comes in a Variety of colors
                                                Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
                                                Possible Attachment Straps (last resort)
                                                Not Suitable for Suction cups, suction tape, magnets

                                                braecn-heavy-duty-184.jpg

                                                ZenCase/ZenRich/BRAECN Rotating Handle Stand iPad 5th-6th Gen 9.7. #184

                                                This case is sold on Amazon under many different names, and even different listings call it different things.  But it's easy to identify this case by the giant "X" on the back, the rotating Velcro hand strap, and the delicate shoulder strap.

                                                When ordering this case, you won't find it on our "To Fit Case" list.  Instead, choose the  BRAECN case #184.

                                                • Screen opening: 7-7/8" x 5-5/16", 200 mm x 151 mm
                                                • Outtside dimension (Without rotating stand): 9-3/4" x 7-1/16" x 13/16", 248 mm x 178 mm x 21 mm
                                                • Nice silicone skin over the flimsiest two-piece breakable plastic shell imaginable
                                                • Thin fabric shoulder strap with extremely thin metal or plastic clips, depending on the brand
                                                • Off-center folding stand makes it easy to tip over
                                                • Conveniently comes apart if you drop it for easy access to the iPad
                                                • Kids can take it apart with one hand. No kidding.
                                                Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
                                                Possible Attachment Straps (last resort)
                                                Not Suitable for Suction cups, suction tape