Originally published March 10, 2019
This page covers cases that we support for keyguards to fit the 11" iPad Pro 11 1st - 4th Generation.
If you have an iPad other than a Pro 11 1st - 4th Gen., you're on the wrong page.
For the iPad Air 11 (M2), look here.
For the 11" iPad Pro 11 (M4), look here.
For any other iPad, look here.
When you order a keyguard for an iPad Pro 11, specify the name and number of the case you find here. You must use the red number to correctly identify a case! Cases are listed alphabetically, but you can also search the page by the name of an iPad case to find one that is sold under more than one brand name.
If you have an iPad Pro 11 case that we don't have depicted here, specify "Other" case when ordering a keyguard and send us a link to the case you have. We'll charge you a small fee to buy the case, measure it, design a keyguard to fit it, and make and test fit the keyguard. After that, we'll add it to our list so you can order keyguards to fit it in the future.
Adaptive Tech Solutions Rugged Rubber iPad Pro 11
The Rugged Rubber case is a variant of the classic EVA folding handle stand. Adaptive Tech Solution's version adds a shoulder strap.
To order a keyguard for the Rugged Rubber, choose the matching Classic EVA case below.
ArmorBox Kido iPad Pro 11
The ArmorBox Kido case is a variant of the classic EVA folding handle stand.
To order a keyguard for the ArmorBox Kido, choose the matching Classic EVA case below.
Avawo Kids Case iPad Pro 11
The Avawo Kids Case is a variant of the classic EVA folding handle stand.
To order a keyguard for the Avawo Kids Case, choose the matching Classic EVA case below.
Bam Bino Space Suit for iPad Air 4-5 10.9/Pro 11 #189
- Screen opening: 9-3/16" x 6-1/2", 234 mm x 167 mm
- Outside dimensions (with handle and folded feet): 11-5/16" x 9-13/16" x 1-1/16", 287 mm x 250 mm x 29 mm
- EVA foam case
- Distinctive arched handle
- Two folding stands behind the lower corners
- Comes in different colors
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Suction cups (only for grids with big openings), suction tape (only for grids with lots of unused space), Velcro (not very strong, and taking the case apart will not be possible), elastic straps (last resort) |
| Not Suitable for | Magnets |
BATYUE Ring Stand iPad Air 4th-5th Gen 10.9, Air 11 M2 (6th Gen), Pro 11 1st-4th Gen #494
Don't confuse this case with the similar-looking models from this and other manufacturers. This one has a giant "X" on the back, the rotating ring stand is centered in the back (not offset), and the ring stand has a rounded square shape. Others have a round ring stand or a Velcro hand strap, and the rotating strap/stand is offset in the big "X".
- Screen opening: 9-1/16" x 6-5/16", 229 mm x 161 mm
- Outside dimensions (including handle): 10-7/16" x 8-5/16" x 1-1/8", 297 mm x 254 mm x 39 mm
- Hard shell with soft silicone skin
- Clip-on front bezel makes for easy insertion and removal of the iPad
- Rotating ring stand
- Shoulder strap
- Comes in several colors
| Best Attachment | Snap-In or lock-in |
| Possible Attachment | Velcro (weak and holds keyguard high off the screen), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
Big Grips Lift iPad 7th-8th-9th Gen. 10.2, Air 3 10.5, Pro 10.5, Air 4/5 10.9,10th Gen. 10.9 and Pro 11 #74
This stiff foam case stretches to fit many different iPad sizes.
- Screen opening: 9-7/16" x 6-7/16", 239 mm x 164 mm
- Outside dimensions (including handle): 11-11/16" x 9-15/16" x 1-9/16", 297 mm x 254 mm x 39 mm
- Comes in several colors
| Best Attachment | Snap-In |
| Possible Attachment | Suction cups or suction tape (on 10.2 and 10.5" iPads only), elastic straps (last resort) |
| Not Suitable for | Suction cups or suction tape (on 10.9" and larger iPads), lock-in, Velcro, magnets |
BMOUO Football w/ Removable Screen Protector iPad Air 4 10.9/Pro 11 #53
Not to be confused with similar-looking cases, this one is distinguishable by the large football embossed on the back.
- Screen opening: 9-3/16" x 6-1/2", 234 mm x 166 mm
- Outside dimensions (with handle and folded feet): 10-11/16" x 9-3/4" x 1-3/16", 272 mm x 248 mm x 31 mm
- EVA foam case
- Distinctive football shape embossed on back panel
- Two folding stands behind the lower corners
- Built-in carrying handle with holes for attaching a strap (not included)
- Comes in 6 different colors
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Velcro (Not very secure), suction cups (limited room), suction tape limited room), straps (last resort) |
| Not Suitable for | Magnets |
Bolete Kids Shock Proof iPad Pro 11
The Bolete Kids Shock Proof is a variant of the classic EVA folding handle stand.
To order a keyguard for the Bolete Kids Shock Proof, choose the matching Classic EVA case below.
BRAECN/ProCase Rotating Handle Stand iPad Pro 11 1st Gen #137
This case is sold on Amazon under many different names, and even different listings call it different things. But it's easy to identify this case by the giant offset "X" on the back, the rotating Velcro hand strap, and the delicate shoulder strap. Do not confuse this case with the #156B below. This is the version that does not have a pencil holder.
- Screen opening: 9" x 6-5/16", 229 mm x 161 mm
- Outside dimensions: 10-3/16" x 7-7/16" x 3/4", 259 mm x 190 mm x 20 mm
- Nice silicone skin over flimsy plastic shell
- Thin fabric shoulder strap with extremely thin metal or plastic clips, depending on the brand
- Off-center folding stand makes it easy to tip over
- Conveniently comes apart if you drop it
- Kids can take it apart with one hand for easy access to the iPad
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Velcro (weak, and holds the keyguard way off the screen), straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
BRAECN/ProCase Rotating Handle Stand w/ Pencil Holder iPad Air 4 10.9/Pro 11 1st-2nd Gen #156B
This case is sold on Amazon under many different names, and even different listings call it different things. But it's easy to identify this case by the giant offset "X" on the back, the rotating Velcro hand strap, and the delicate shoulder strap. Do not confuse this case with the #137 above. This is the version with the pencil holder in the case. Also don't confuse it with the case #406 below. They both have a giant "X" on the back, but the rotating handle stand on that one is centered perfectly. On this one, it's offset, making for a very tippy stand.
- Screen opening: 9-1/16" x 6-3/8", 230 mm x 161 mm
- Outside dimensions: 10-3/8" x 8-5/16" x 13/16", 264 mm x 211 mm x 20 mm
- Apple Pencil holder
- Nice silicone skin over flimsy plastic shell
- Thin fabric shoulder strap with extremely thin metal or plastic clips, depending on the brand
- Off-center folding stand makes it easy to tip over
- Conveniently comes apart if you drop it
- Kids can take it apart with one hand for easy access to the iPad
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Velcro (weak, and holds the keyguard way off the screen), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
Brenthaven Protect+ iPad Air 4-5 10.9, Pro 11 2nd-4th Gen #487
Brenthaven makes several iPad cases and some are quite similar to this one. Don't confuse it with the others. This is the only Brenthaven case for the Pro 11 that we've made a keyguard to fit.
- Screen opening: 9" x 6-5/16", 229 mm x 161 mm
- Outside dimensions: 10-11/16" x 8" x 7/8", 273 mm x 203 mm x 22 mm
- Very stiff elastic skin over extremely tough plastic shell
- Clear plastic back with elastic hand strap
- Full-width folding stand is more stable than most
- Protective rubber cover over back camera openings
- Hidden Apple Pencil holder in top edge of case
| Best Attachment | Snap-in or lock-in for permanent mounting (must take the case apart to install the keyguard) |
| Possible Attachment | Velcro, elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
BuddiBox EVA Series iPad Pro 11
The BuddiBox EVA Series is a variant of the classic EVA folding handle stand.
To order a keyguard for the BuddiBox EVA Series, choose the matching Classic EVA case below.
Casebus Classic Cute Case iPad Air 4-5 10.9/Pro 11 #445
Casebus's variation on the classic folding handle case. The is not the same as the Classic EVA case shown below.
- Screen opening: 9-5/16" x 6-5/8", 238 mm x 168 mm
- Outside dimensions (with handle): 10-5/8" x 10-15/16" x 7/8", 270 mm x 277 mm x 22 mm
- Folding handle becomes stand
- Apple pencil holder behind handle (reversible)
- Holes in handle for optional shoulder strap
- Comes in several colors
| Best Attachment | Snap-In |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Lock-in, suction cups, suction tape, Velcro, magnets |
Classic EVA iPad Pro 11 #78
This case is sold under a huge variety of brand names. There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.
- Screen opening: 9-3/8" x 6-11/16", 238 mm x 169 mm
- Outside dimensions (with handle): 10-9/16" x 11" x 7/8", 269 mm x 282 mm x 22 mm
- Folding handle becomes stand
- Comes in several colors
| Best Attachment | Snap-In |
| Possible Attachment | Suction cups, suction tape, straps (last resort) |
| Not Suitable for | Lock-in, Velcro, magnets |
Cooper Dynamo (not RE) iPad Pro 11
The Cooper Dynamo is a variant of the classic EVA folding handle stand. Don't confuse it with the Cooper DynamoRE described below, which comes with a removable screen protector frame.
To order a keyguard for the Cooper Dynamo, choose the matching Classic EVA case above.
Cooper DynamoRE iPad Air 4/5 10.9, Pro 11 #416
This case is a variant of the Cooper Dynamo case that comes with a screen protector in a frame that slips into the front of the case. Don't confuse it with the regular Cooper Dynamo described above. The regular Dynamo does not have the removable screen protector frame.
- Screen opening: 9-3/16" x 6-1/2", 233 mm x 165 mm
- Outside dimensions (with handle): 11" x 11-1/4" x 7/8", 278 mm x 286 mm x 22 mm
- Durable EVA foam
- Folding handle becomes stand
- Removable screen protector frame clips into front opening
- Comes in several colors
| Best Attachment | Snap-in or lock-in |
| Possible Attachment | Suction cups (partial blockage of some cells), suction tape, straps (last resort) |
| Not Suitable for | Velcro, magnets |
eTopxizu Tablet Case iPad Pro 11
The eTopxizu Tablet Case is a variant of the classic EVA folding handle stand.
To order a keyguard for the eTopxizu Tablet Case, choose the matching Classic EVA case above.
Fintie Kiddie (not Kiddie Light) iPad Pro 11
The Fintie Kidde, also called the Fintie Casebot Kiddie, is a variant of the classic EVA folding handle stand. Do not confuse it with the Fintie Kiddie Light, or the Fintie Casebot Kiddie Light.
To order a keyguard for the Fintie Kiddie, choose the matching Classic EVA case above.
Griffin Survivor All-Terrain iPad Pro 11 #452
- Screen opening: 9-1/8" x 6-3/8", 232 mm x 162 mm
- Outside dimensions (without removable handle): 10-7/16" x 7-3/4" x 11/16", 266 mm x 197 mm x 17 mm
- Hard plastic shell with elastic skin
- Removable front clip
- Removable carrying handle that clips to back
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, Velcro, magnets |
HDE Shock Proof iPad Pro 11 iPad Pro 11
The HDE Shock Proof, also called the HDE Kids Case, is a variant of the classic EVA folding handle stand. Do not confuse it with the HDE Shockproof Case with a built-in screen protector.
To order a keyguard for the HDE Shock Proof, choose the matching Classic EVA case above.
JETech Folding Handle w/ Screen Protector iPad Air 4/5 10.9, Pro 11 #307
- Screen opening: 9-1/8" x 6-3/8", 231 mm x 162 mm
- Outside dimensions (with handle): 10-15/16" x 11-1/8" x 15/16", 279 mm x 283 mm x 23 mm
- Durable EVA foam
- Folding handle becomes stand
- Built-in screen protector frame fits into front opening
- Comes in several colors
| Best Attachment | Snap-in or lock-in |
| Possible Attachment | Suction cups (partial blockage of some cells), suction tape, elastic straps (last resort) |
| Not Suitable for | Velcro, magnets |
Kay's Case KidBox iPad Pro 11
The Kay's Case KidBox is a variant of the classic EVA folding handle stand.
To order a keyguard for the Kay's Case KidBox, choose the matching Classic EVA case above.
Ledniceker/MENZO iPad Pro 11 Case For Kids #314
There are similar-looking cases that should not be confused for the TIRIN Kids Case, sometimes called the Shock Proof Smart Handle Stand. This case has a banana-shaped opening under the top handle and cat's eye-shaped openings under the right and left handles. Some versions have cutouts in the top and bottom left corners for the ambient light sensors on certain models of the iPad 11.
- Screen opening: 9-5/16" x 6-11/16", 237 mm x 169 mm
- Outside dimensions (including handles and kick stand): 13-5/8" x 10" x 13/16", 346 mm x 24 mm x 21 mm
- Headphone-wearing robot on back
- Robot's legs fold out to become a stand
- Comes with thin shoulder strap
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Suction cups, suction tape, straps (last resort) |
| Not Suitable for | Velcro, magnets |
LTROP "Iron Man" Case iPad Air 4 - 5 10.9/Pro 11 #409
This case is sold under several different brand names, including AVAWO, MENZO, SUPLIK, SUPNICE and TIRIN. To order a keyguard to fit this case under any of those brands, choose the LTROP case #409 from our "To Fit Case" list.
There are similar-looking cases that should not be confused for the "Iron Man" case. This is not the Robot Case sold under these same brand names. This case has a similar banana-shaped opening under the top handle and straighter openings under the right and left handles. It has a figure on the back that looks more like Iron Man than a robot.
- Screen opening: 9-3/8" x 6-11/16", 238 mm x 170 mm
- Outside dimensions (including handles and kick stand): 13-3/4" x 9-13/16" x 1-1/8", 350 mm x 250 mm x 29 mm
- "Iron Man" shaped figure on the back
- Legs fold out to become a stand
- Shoulder strap
| Best Attachment | Snap-in for permanent mounting |
| Possible Attachment | Suction cups, suction tape, elastic straps (last resort) |
| Not Suitable for | Lock-in, Velcro, magnets |
Miesherk Rotating Handle Stand iPad Air 4-5 10.9 / Pro 11 1st-2nd-3rd Gen #406
Don't confuse this case with the case #156B above. They both have a giant "X" on the back, but the rotating handle stand on that one is off-centered. On this one, it's right in the center.
- Screen opening: 9-3/16" x 6-3/8", 231 mm x 162 mm
- Outside dimensions (without rotating handle): 10-1/2" x 8-1/4" x 3/4", 267 mm x 211 mm x 20 mm
- Removable front bezel
- Rotating handle/stand on back
- Shoulder strap
- Apple Pencil holder
| Best Attachment | Snap-In or lock-in for permanent mounting |
| Possible Attachment | Velcro for quick change (not very secure, and holds the keyguard high off the screen), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
MobileDemand iPad Pro 11 #358
This case has a hard exterior shell with a soft silicone liner to encase the iPad.
- Screen opening: 9-3/8" x 6-5/8", 238 mm x 169 mm
- Outside dimensions: 10-1/16" x 7-3/8" x 1-1/16", 255 mm x 188 mm x 26 mm
- Carrying handle
- Elastic hand strap on back
- Multiple options for mounting to a stand or mechanical arm
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Suction cups, suction tape, straps (last resort) |
| Not Suitable for | Velcro, magnets |
Monoprice Kidz Cover iPad Pro 11
The Monoprice Kidz Cover is a variant of the classic EVA folding handle stand.
To order a keyguard for the Monoprice Kidz Cover, choose the matching Classic EVA case above.
NEWSTYLE Shockproof Light Weight iPad Pro 11
NEWSTYLE Shockproof Light Weight is a variant of the classic EVA folding handle stand.
To order a keyguard for the NEWSTYLE Shockproof Light Weight, choose the matching Classic EVA case above.
OtterBox Defender iPad Pro 11 1st-2nd Gen (not 3rd) #312
This case is NOT the Defender designed for the Pro 11 3rd Generation. That case is different and the keyguards are not interchangeable. Measure the screen opening to determine which one you have.
- Screen opening: 9-1/4" x 6-9/16", 235 mm x 166 mm
- Outside dimensions (without stand): 10-3/16" x 7-1/2" x 9/16", 259 mm x 191 mm x 17 mm
- Includes built-in screen protector
- Hard frame with elastic skin
- Big stand clicks to the back
- Does NOT say "Drop +" on the inside back panel
| Best Attachment | Snap-in or lock-in for permanent mounting, |
| Possible Attachment | Suction cups (limited room), suction tape (limited room), straps (last resort) |
| Not Suitable for | Velcro, magnets |
OtterBox Defender iPad Pro 11 3rd Gen (also fits 1st and 2nd) #148B
This case is the Defender designed for the Pro 11 3rd Generation. It also fits the 1st-2nd Generation iPad Pro 11, but do not confuse it for the case #312 above. That case is different and the keyguards are not interchangeable. Measure the screen opening to determine which one you have.
- Screen opening: 9-7/16" x 6-11/16", 239 mm x 170 mm
- Outside dimensions (without stand): 10-1/4" x 7-1/2" x 9/16", 260 mm x 191 mm x 16 mm
- Includes built-in screen protector
- Hard frame with elastic skin
- Big stand clicks to the back
- Does say "Drop +" on the inside back panel
| Best Attachment | Snap-in or lock-in for permanent mounting, |
| Possible Attachment | Suction cups (limited room), suction tape (limited room), straps (last resort) |
| Not Suitable for | Velcro, magnets |
PRC-Saltillo VersaWrap iPad 7th-8th Gen 10.2, Air 4/Air 5 10.9, 10th Gen 10.9, Air 11, Pro 11, #431
This is a funky case that stretches different ways to accommodate different iPad sizes, so it seems a little weird when you first put in the iPad. The screen opening ends up a different size for each different iPad size.
- Screen opening: 9-7/16" x 6-3/4", 240 mm x 172 mm
- Outside dimensions (with handle): 10-7/16" x 9-3/16" x 1", 265 mm x 233 mm x 25 mm
- Impact-resistant EVA material
- Folding stand
- Shoulder strap
- Optional speaker
- Pocket for adding an Apple AirTag
- Comes in a variety of colors
| Best Attachment | Snap-in |
| Possible Attachment | Straps (last resort) |
| Not Suitable for | Suction cups, suction tape, lock-in, Velcro, magnets |
PRC-Saltillo Via Pro w/ Keyguard Holder iPad Pro 11 #394
This keyguard fits the Via Pro in either the Active Case or the Classic Case with the keyguard holder. The case comes with a variety of configurations and options, but they share the same keyguard holder. Keyguard not work without the keyguard holder.
- Screen opening: 8-15/16" x 6-1/2", 227 mm x 165 mm
- Outside dimensions: Varies with case
- Rigid foam case in two variations
- Hard plastic keyguard holder fits either case
| Best Attachment | Snap-in |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Velcro, magnets, suction cups, suction tape |
Pure Sense Buddy iPad Pro 11
Pure Sense Buddy is a variant of the classic EVA folding handle stand. It's different in that it includes a thin shoulder strap and an anti-microbial surface.
To order a keyguard for the Pure Sense Buddy, choose the matching Classic EVA case above.
RJ Cooper Ultimate II
The Ultimate II is a variant of the classic EVA folding handle stand. RJ Cooper's version adds a shoulder strap and a more sturdy stand.
To order a keyguard for the Ultimate II, choose the matching Classic EVA case above.
ROISKIN Rotating Handle Stand iPad Air 4/5 10.9, Pro 11 1st-4th Gen #423
- Screen opening: 9-1/8" x 6-3/8", 231 mm x 163 mm
- Outside dimensions (without rotating handle): 10-3/8" x 7-5/8" x 13/16", 268 mm x 195 mm x 20 mm
- Removable front bezel
- Rotating octagonal handle/stand on back
- Thin shoulder strap
- Stylus/pen holder
| Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change (not very secure) |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
Roocase KidArmor iPad Pro 11
The Roocase KidArmor is a variant of the classic EVA folding handle stand.
To order a keyguard for the Roocase KidArmor, choose the matching Classic EVA case above.
SCSVPN Square Ring Stand iPad 4th-5th Gen 10.9/Pro 11 1st-4th Gen #168B
This case is sold on Amazon under many different names, and even different listings call it different things. But it's easy to identify this case by the giant "X" on the back and the squared-off ring stand.
Do not confuse this with the similar rotating hand strap stand above. This case has a rigid plastic ring stand centered on the back of the case. That one has a Velcro strap on the back.
Also don't confuse it with the similar rotating ring stand above. This case has a rounded square ring stand surrounded by a soft skin. That one has a round ring stand and the back of the case is clear plastic.
- Screen opening: 9-1/16" x 6-3/8", 230 mm x 161 mm
- Outside dimensions (without handle stand): 10-7/16" x 8-5/16" x 13/16", 265 mm x 211 mm x 21 mm
- Hard shell with elastic skin
- Removable front clip for easy insertion of iPad
- Rotating rounded-square ring stand
- Shoulder strap
- Apple pencil holder on top front and also elastic pencil/stylus holder on back ring stand
- Comes in several colors
| Best Attachment | Snap-In, lock-in |
| Possible Attachment | Velcro (weak and holds keyguard high off the screen), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
ShellBox/ManGix iPad Pro 11 #367
- Screen opening: 9-3/16" x 6-7/16", 233 mm x 164 mm
- Outside dimensions: 10-1/2" x 7-7/8" x 11/16", 267 mm x 200 mm x 17 mm
- Includes built-in screen protector
| Best Attachment | Snap-in or lock-in for permanent mounting, |
| Possible Attachment | Suction cups, suction tape, Velcro, straps (last resort) |
| Not Suitable for | magnets |
ShellBox Waterproof iPad Pro 11 #322a
- Screen opening: 9-1/4" x 6-9/16", 236 mm x 166 mm
- Outside dimensions: 10-5/16" x 7-1/2" x 9/16", 261 mm x 190 mm x 15 mm
- Includes built-in screen protector
| Best Attachment | Snap-in or lock-in for permanent mounting, |
| Possible Attachment | Suction cups, suction tape, Velcro, straps (last resort) |
| Not Suitable for | magnets |
SEYMAC Rotating Handle Stand iPad Air 4/5 10.9/Pro 11 1st-2nd Gen #109B
This case is sold under several different brand names. One thing to note is that the small screen opening can require compromises on the keyguard design. Items close to the edge of the screen may be hard to reach.
This case is very similar to the case #467 below. The significant difference is that that one gives us enough room for a magnetic attachment, and this one does not. Measure the outside dimensions to be sure which one you have.
- Screen opening: 9-1/16" x 6-3/8", 231 mm x 162 mm
- Outside dimensions (without rotating handle): 10-1/2" x 8-5/16" x 13/16", 267 mm x 211 mm x 21 mm
- Removable front bezel with built-in screen protector
- Rotating handle/stand on back
- Thin shoulder strap
- Stylus/pen holder
| Best Attachment | Snap-In or lock-in. Keyguard comes on and off with the removable front bezel. |
| Possible Attachment | Velcro (holds the keyguard high off the screen), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
SEYMAC Rotating Handle Stand iPad Pro 11 1st-2nd-3rd-4th Gen #467
This case is sold under several different brand names. One thing to note is that the small screen opening can require compromises on the keyguard design. Items close to the edge of the screen may be hard to reach.
This case is very similar to the case #109B above. The significant difference is that this one gives us enough room for a magnetic attachment, and that one does not. Measure the outside dimensions to be sure which one you have.
- Screen opening: 9-1/16" x 6-3/8", 231 mm x 162 mm
- Outside dimensions (without rotating handle): 10-11/16" x 8-1/2" x 13/16", 271 mm x 217 mm x 21 mm
- Removable front bezel with built-in screen protector
- Rotating handle/stand on back
- Thin shoulder strap
- Stylus/pen holder
| Best Attachment | Snap-In or lock-in. Keyguard comes on and off with the removable front bezel. |
| Possible Attachment | Velcro or magnets (both hold the keyguard high off the screen), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape |
SUPLIK Folding Handle w/ Built-in Screen Protector iPad Air 4-Air 5 10.9/Pro 11 1st-4th Gen #429
Not to be confused with similar-looking cases, this one is distinguishable by the folding handle, no plastic feet, and large rectangular shape embossed on the back.
- Screen opening: 9-3/16" x 6-1/2", 234 mm x 166 mm
- Outside dimensions (with handle and folded feet): 11" x 11-1/4" x 7/8", 280 mm x 285 mm x 22 mm
- EVA foam case
- Folding handle with holes for attaching a strap (not included)
- Comes in pink or blue.
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, Velcro, magnets |
SUPLIK Rigid Handle w/ Built-in Screen Protector iPad Air 4-Air 5 10.9/Pro 11 1st-4th Gen #23B
Not to be confused with similar-looking cases, this one is distinguishable by the arched, rigid handle, two folding plastic feet on the back, and large angular shape embossed on the back.
- Screen opening: 9-3/16" x 6-1/2", 234 mm x 166 mm
- Outside dimensions (with handle and folded feet): 10-9/16" x 9-9/16" x 7/8", 280 mm x 285 mm x 22 mm
- EVA foam case
- Rigid arched handle
- Comes in several colors.
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, Velcro, magnets |
SUPLIK/TOEVEK Robot Case iPad Air 4-Air 5 10.9/Air 11/Pro 11 #410
There are similar-looking cases that should not be confused for the Robot case. This case has a banana-shaped opening under the top handle and cat's eye-shaped openings under the right and left handles.
There are two versions of the robot case for the 10.9/11" iPads. The red case below also fits the iPad 10th Gen and you can identify it visually by the additional camera openings along the top edge of the main screen opening.
- Screen opening: 9-3/8" x 6-3/4", 238 mm x 171 mm
- Outside dimensions (including handles and kick stand): 13-3/4" x 10-1/16" x 1-1/8", 348 mm x 255 mm x 30 mm
- Headphone-wearing robot on back
- Robot's legs fold out to become a stand
- Comes with thin shoulder strap
| Best Attachment | Snap-in for permanent mounting |
| Possible Attachment | Suction cups, suction tape, elastic straps (last resort) |
| Not Suitable for | Lock-in, Velcro, magnets |
Travellor Kido iPad Pro 11
The Travellor Kido is a variant of the classic EVA folding handle stand.
To order a keyguard for the Travellor Kido, choose the matching Classic EVA case above.
Unicorn Beetle Pro iPad Pro 11 #365
- Screen opening: 9-1/16" x 6-5/16", 230 mm x 161 mm
- Outside dimensions: 10-3/16" x 7-15/16" x 9/16", 258 mm x 202 mm x 15 mm
- Polyurethane skin over polycarbonate shell
- Built-in screen protector
- Apple Pencil holder
- Easiest rigid case to insert and remove iPad
- Available in few colors
- Affordable - the best value among rigid cases
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Velcro (not very secure), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
ZenCase 360° Rotatable Handle Stand iPad Pro 11
The ZenCase is a variant of the BRAECN Swivel Stand. It costs more and is of equal quality.
To order a keyguard for the ZenCase rotatable case, choose the matching BRAECN Swivel Stand case above.
ZenRich 360° Rotatable Handle Stand iPad Pro 11
The ZenRich is a variant of the BRAECN Swivel Stand. It costs more and is of equal quality.
To order a keyguard for the ZenRich rotatable case, choose the matching BRAECN Swivel Stand case above.