This page covers cases that we support for keyguards to fit the 10.9" iPad Air 4/Air 5.
If you have an iPad other than a 10.9" Air 4 or Air 5, you're on the wrong page. This is not the page for the 10th Gen 10.9" or the Air 11.
For the iPad 10th Gen 10.9", look here.
For the iPad Air 11 (M2), sometimes called the Air 6th Gen, look here.
For any other iPad, look here.
When you order a keyguard for an iPad Air 4 or Air 5 10.9, specify the name and number of the case you find here. You must use the red number to correctly identify a case! Cases are listed alphabetically, but you can also search the page by the name of an iPad case to find one that is sold under more than one brand name.
If you have an iPad Air 4/5 10.9" case that we don't have depicted here, specify "Other" case when ordering a keyguard and send us a link to the case you have. We'll charge you a small fee to buy the case, measure it, design a keyguard to fit it, and make and test fit the keyguard. After that, we'll add it to our list so you can order keyguards to fit it in the future.
Adaptive Tech Solutions Rugged Rubber
The Rugged Rubber case is a variant of the classic EVA folding handle stand. Adaptive Tech Solution's version adds a shoulder strap.
To order a keyguard for the Rugged Rubber, choose the matching Classic EVA case below.
ArmorBox Kido
The ArmorBox Kido case is a variant of the classic EVA folding handle stand.
To order a keyguard for the ArmorBox Kido, choose the matching Classic EVA case below.
Avawo Kids Case
The Avawo Kids Case is a variant of the classic EVA folding handle stand.
To order a keyguard for the Avawo Kids Case, choose the matching Classic EVA case below.
Bam Bino Space Suit for iPad Air 4-5 10.9/Pro 11 #189
- Screen opening: 9-3/16" x 6-1/2", 234 mm x 167 mm
- Outside dimensions (with handle and folded feet): 11-5/16" x 9-13/16" x 1-1/16", 287 mm x 250 mm x 29 mm
- EVA foam case
- Distinctive arched handle
- Two folding stands behind the lower corners
- Built-in carrying handle
- Shoulder strap
- Comes in different colors
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Suction cups, suction tape, straps (last resort) Velcro (Not very strong) |
| Not Suitable for | Magnets |
BATYUE Ring Stand iPad Air 4th-5th Gen 10.9, Air 11 M2 (6th Gen), Pro 11 1st-4th Gen #494
Don't confuse this case with the similar-looking models from this and other manufacturers. This one has a giant "X" on the back, the rotating ring stand is centered in the back (not offset), and the ring stand has a rounded square shape. Others have a round ring stand or a Velcro hand strap, and the rotating strap/stand is offset in the big "X".
- Screen opening: 9-1/16" x 6-5/16", 229 mm x 161 mm
- Outside dimensions (including handle): 10-7/16" x 8-5/16" x 1-1/8", 297 mm x 254 mm x 39 mm
- Hard shell with soft silicone skin
- Clip-on front bezel makes for easy insertion and removal of the iPad
- Rotating ring stand
- Shoulder strap
- Comes in several colors
| Best Attachment | Snap-In or lock-in |
| Possible Attachment | Velcro (weak and holds keyguard high off the screen), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
Big Grips Lift iPad 7th-8th-9th Gen. 10.2, Air 3 10.5, Pro 10.5, Air 4/5 10.9,10th Gen. 10.9 and Pro 11 #74
This stiff foam case stretches to fit many different iPad sizes.
- Screen opening: 9-7/16" x 6-7/16", 239 mm x 164 mm
- Outside dimensions (including handle): 11-11/16" x 9-15/16" x 1-9/16", 265 mm x 211 mm x 30 mm
- Comes in several colors
| Best Attachment | Snap-In |
| Possible Attachment | Suction cups or suction tape (on 10.2 and 10.5" iPads only), elastic straps (last resort) |
| Not Suitable for | Suction cups or suction tape (on 10.9" and larger iPads), lock-in, Velcro, magnets |
BMOUO Folding Handle Case w/ Built-in Screen Protector iPad Air 4-5 10.9 #492
This case is sold under a variety of brand names. It's easy to spot because of the distinctive openings on the upper corners where a shoulder strap (not included) could be attached.
Do not confuse this case for the similar case #429 below. That one has larger strap holes in the upper corners, and the handle has fewer ridges along the top of the opening. This one has smaller, triangular strap holes and more ridges along the top of the handle opening.
- Screen opening: 9-3/16" x 6-1/2", 234 mm x 166 mm
- Outside dimensions (with handle): 10-7/8" x 11-1/8" x 7/8", 276 mm x 283 mm x 23 mm
- Front bezel with built-in screen protector inserts into foam case
- Impact-resistant EVA material
- Comes in a variety of colors
| Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change (weak, and holds the keyguard high off the screen) |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
BMOUO Football w/ Built-in Screen Protector iPad Air 4-5 10.9/Pro 11 #53
Not to be confused with similar-looking cases, this one is distinguishable by the large football embossed on the back.
- Screen opening: 9-3/16" x 6-1/2", 234 mm x 166 mm
- Outside dimensions (with handle and folded feet): 10-11/16" x 9-3/4" x 1-3/16", 272 mm x 248 mm x 31 mm
- EVA foam case
- Distinctive football shape embossed on back panel
- Two folding stands behind the lower corners
- Built-in carrying handle with holes for attaching a strap (not included)
- Comes in 6 different colors
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Velcro (Not very secure), suction cups (limited room), suction tape limited room), straps (last resort) |
| Not Suitable for | Magnets |
Bolete Kids Shock Proof
The Bolete Kids Shock Proof is a variant of the classic EVA folding handle stand.
To order a keyguard for the Bolete Kids Shock Proof, choose the matching Classic EVA case below.
BRAECN/ProCase Rotating Hand Strap w/ Pencil Holder iPad Air 4-5 10.9/Pro 11 1st-4th Gen #156B
Careful here!
First, this case is not the same as the case #127B below. That case fits the Air 4-5 and the Air 11 (M2), sometimes called the Air 6th Gen. This one fits the iPad Air 4-5 and the Pro 11 1st-4th Gen. And if your case has the stand off-centered like this one, but it fits the Air 11 (M2), it's not this one, either!
Second, this case is sold on Amazon under many different names, and even different listings call it different things. But it's easy to identify this case by the giant offset "X" on the back, the rotating Velcro hand strap, and the delicate shoulder strap. Do not confuse this case with the one without the pencil holder. This is the version with the pencil holder in the case. Also don't confuse it with the case #406 below. They both have a giant "X" on the back, but the rotating handle stand on that one is centered perfectly. On this one, it's offset, making for a very tippy stand.
- Screen opening: 9-1/16" x 6-3/8", 230 mm x 161 mm
- Outside dimensions: 10-3/8" x 8-5/16" x 13/16", 264 mm x 211 mm x 20 mm
- Apple Pencil holder
- Nice silicone skin over flimsy plastic shell
- Thin fabric shoulder strap with extremely thin metal or plastic clips, depending on the brand
- Off-center folding stand makes it easy to tip over
- Conveniently comes apart if you drop it
- Kids can take it apart with one hand for easy access to the iPad
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Velcro (weak, and holds the keyguard way off the screen), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
BRAECN Rotating Hand Strap Stand iPad Air 4th-5th Gen 10.9, Air 11 M2 (6th Gen) #127B
Careful here!
First, this case is not the same as the case #156B above. That case fits the iPad Air 4-5 and the Pro 11 1st-4th Gen. This one fits the Air 4-5 and the Air 11 (M2), sometimes called the Air 6th Gen.
Second, Amazon has two different listings for this case, and they're also different! They look very similar, and from the front they look almost identical, but the difference is on the back. The other one has the rotating hand strap/stand offset on the back toward one end. This one has the stand exactly centered on the back. Be sure yours has the centered stand, or the keyguard won't fit.
- Screen opening: 9-1/16" x 6-3/8", 230 mm x 163 mm
- Outside dimensions (excluding rotating hand strap/stand): 10-9/16" x 8-3/8" x 13/16", 269 mm x 213 mm x 21 mm
- Hard shell with soft silicone skin
- Clip-on front bezel makes for easy insertion and removal of the iPad
- Rotating hand strap/stand
- Shoulder strap
- Comes in black or colorful pink
| Best Attachment | Snap-In or lock-in |
| Possible Attachment | Velcro (weak and holds keyguard high off the screen, not suitable for grids with many small cells), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
Brenthaven Protect+ iPad Air 4-5 10.9, Pro 11 2nd-4th Gen #487
Brenthaven makes several iPad cases and some are quite similar to this one. Don't confuse it with the others. This is the only Brenthaven case for the Air 4-Air 5 10.9 that we've made a keyguard to fit.
- Screen opening: 9" x 6-5/16", 229 mm x 161 mm
- Outside dimensions: 10-11/16" x 8" x 7/8", 273 mm x 203 mm x 22 mm
- Very stiff elastic skin over extremely tough plastic shell
- Clear plastic back with elastic hand strap
- Full-width folding stand is more stable than most
- Protective rubber cover over back camera openings
- Hidden Apple Pencil holder in top edge of case
| Best Attachment | Snap-in or lock-in for permanent mounting (must take the case apart to install the keyguard) |
| Possible Attachment | Velcro, elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
BuddiBox EVA Series
The BuddiBox EVA Series is a variant of the classic EVA folding handle stand.
To order a keyguard for the BuddiBox EVA Series, choose the matching Classic EVA case below.
Casebus Classic Cute Case iPad Air 4-5 10.9/Pro 11 #445
Casebus's variation on the classic folding handle case. The is not the same as the Classic EVA case shown below.
- Screen opening: 9-5/16" x 6-5/8", 238 mm x 168 mm
- Outside dimensions (with handle): 10-5/8" x 10-15/16" x 7/8", 270 mm x 277 mm x 22 mm
- Folding handle becomes stand
- Apple pencil holder behind handle (reversible)
- Holes in handle for optional shoulder strap
- Comes in several colors
| Best Attachment | Snap-In |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Lock-in, suction cups, suction tape, Velcro, magnets |
CCMAO KickStand iPad Air 4-5 10.9"/Air 11 #155
This case is sold under a variety of brand names.
- Screen opening: 9-1/8" x 6-9/16", 231 mm x 167 mm
- Outside dimensions (with handle): 10-5/16" x 8-1/16" x 11/16", 262 mm x 205 mm x 17 mm
- Soft silicone skin over 2-piece polycarbonate clamshell
- Off-center kickstand
- Pencil holder on front
- Comes in several colors
| Best Attachment | Snap-in, lock-in |
| Possible Attachment | Suction cups, suction tape, elastic straps (last resort) |
| Not Suitable for | Velcro, magnets |
Classic EVA iPad Air 4-5 10.9/Pro 11 #78
This case is sold under a huge variety of brand names, too many to list. There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.
This model fits both the iPad Air 4 10.9" and iPad Pro 11. Earlier versions did not have the two small openings for the ambient light sensors shown in this picture, only the notch between them.
- Screen opening: 9-3/8" x 6-11/16", 238 mm x 169 mm
- Outside dimensions (with handle): 10-9/16" x 11" x 7/8", 269 mm x 282 mm x 22 mm
- Folding handle becomes stand
- Comes in several colors
| Best Attachment | Snap-In |
| Possible Attachment | Suction cups, suction tape, straps (last resort) |
| Not Suitable for | Lock-in, Velcro, magnets |
Cooper Dynamo (not RE)
The Cooper Dynamo is a variant of the classic EVA folding handle stand. Don't confuse it with the Cooper DynamoRE described below, which comes with a built-in screen protector frame.
To order a keyguard for the Cooper Dynamo, choose the matching Classic EVA case above.
Cooper DynamoRE iPad Air 4/5 10.9, Pro 11 #416
This case is a variant of the Cooper Dynamo case that comes with a screen protector in a frame that slips into the front of the case. Don't confuse it with the regular Cooper Dynamo described above. The regular Dynamo does not have the built-in screen protector frame.
- Screen opening: 9-3/16" x 6-1/2", 233 mm x 165 mm
- Outside dimensions (with handle): 11" x 11-1/4" x 7/8", 278 mm x 286 mm x 22 mm
- Durable EVA foam
- Folding handle becomes stand
- Built-in screen protector frame clips into front opening
- Comes in several colors
| Best Attachment | Snap-in or lock-in |
| Possible Attachment | Suction cups (partial blockage of some cells), suction tape, straps (last resort) |
| Not Suitable for | Velcro, magnets |
eTopxizu Tablet Case
The eTopxizu Tablet Case is a variant of the classic EVA folding handle stand.
To order a keyguard for the eTopxizu Tablet Case, choose the matching Classic EVA case above.
Fintie Kiddie (not Kiddie Light)
The Fintie Kidde, also called the Fintie Casebot Kiddie, is a variant of the classic EVA folding handle stand. Do not confuse it with the Fintie Kiddie Light, or the Fintie Casebot Kiddie Light.
To order a keyguard for the Fintie Kiddie, choose the matching Classic EVA case above.
Griffin Survivor iPad Air 4-5 10.9 #396
- Screen opening: 9-1/16" x 6-5/16", 230 mm x 161 mm
- Outside dimensions: 10-7/16" x 7-3/4" x 5/8", 265 mm x 197 mm x 17 mm
- Silicone skin over polycarbonate shell
- Built-in screen protector
- Attached kickstand
- Apple Pencil holder
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Straps (last resort) |
| Not Suitable for | Suction cups, suction tape, Velcro, magnets |
HDE Shock Proof
The HDE Shock Proof, also called the HDE Kids Case, is a variant of the classic EVA folding handle stand. Do not confuse it with the HDE Shockproof Case with a built-in screen protector.
To order a keyguard for the HDE Shock Proof, choose the matching Classic EVA case above.
Kay's Case KidBox
The Kay's Case KidBox is a variant of the classic EVA folding handle stand.
To order a keyguard for the Kay's Case KidBox, choose the matching Classic EVA case above.
JETech Folding Handle w/ Screen Protector iPad Air 4/5 10.9, Pro 11 #307
- Screen opening: 9-1/8" x 6-3/8", 231 mm x 162 mm
- Outside dimensions (with handle): 10-15/16" x 11-1/8" x 15/16", 279 mm x 283 mm x 23 mm
- Durable EVA foam
- Folding handle becomes stand
- Built-in screen protector frame fits into front opening
- Comes in several colors
| Best Attachment | Snap-in or lock-in |
| Possible Attachment | Suction cups (partial blockage of some cells), suction tape, elastic straps (last resort) |
| Not Suitable for | Velcro, magnets |
LTROP "Iron Man" Case iPad Air 4-5 10.9/Pro 11 #409
This case is sold under several different brand names, including AVAWO, MENZO, SUPLIK, SUPNICE and TIRIN. To order a keyguard to fit this case under any of those brands, choose the LTROP case #409 from our "To Fit Case" list.
There are similar-looking cases that should not be confused for the "Iron Man" case. This is not the Robot Case sold under these same brand names. This case has a similar banana-shaped opening under the top handle and straighter openings under the right and left handles. It has a figure on the back that looks more like Iron Man than a robot.
- Screen opening: 9-3/8" x 6-11/16", 238 mm x 170 mm
- Outside dimensions (including handles and kick stand): 13-3/4" x 9-13/16" x 1-1/8", 350 mm x 250 mm x 29 mm
- "Iron Man" shaped figure on the back
- Legs fold out to become a stand
- Shoulder strap
| Best Attachment | Snap-in for permanent mounting |
| Possible Attachment | Suction cups, suction tape, elastic straps (last resort) |
| Not Suitable for | Lock-in, Velcro, magnets |
Miesherk Rotating Handle Stand iPad Air 4-5 10.9 / Pro 11 1st-3rd Gen #406
Don't confuse this case with the case #156B above. They both have a giant "X" on the back, but the rotating handle stand on that one is off-centered. On this one, it's right in the center.
- Screen opening: 9-3/16" x 6-3/8", 231 mm x 162 mm
- Outside dimensions (without rotating handle): 10-1/2" x 8-1/4" x 3/4", 267 mm x 211 mm x 20 mm
- Removable front bezel
- Rotating handle/stand on back
- Shoulder strap
- Apple Pencil holder
| Best Attachment | Snap-In or lock-in for permanent mounting |
| Possible Attachment | Velcro for quick change (not very secure, and holds the keyguard high off the screen), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
Monoprice Kidz Cover
The Monoprice Kidz Cover is a variant of the classic EVA folding handle stand.
To order a keyguard for the Monoprice Kidz Cover, choose the matching Classic EVA case above.
NEWSTYLE Shockproof Light Weight
NEWSTYLE Shockproof Light Weight is a variant of the classic EVA folding handle stand.
To order a keyguard for the NEWSTYLE Shockproof Light Weight, choose the matching Classic EVA case above.
Otterbox Defender iPad Air 4-5 10.9 #384
Not to be confused with the later case #495 below. This one has a clear plastic circle on the back that reveals the Apple logo on the iPad, has a big "Otter" and a little "box" on the back, and only fits the Air 4 and 5. That one has the word "DROP+" lightly embossed inside the back, and the word "OTTERBOX" recessed into the outside back, and also fits the iPad Air 11 (M2).
Measure the front opening to determine which one you have. This one has the smaller opening.
- Screen opening: 9-3/16" x 6-7/16", 233 mm x 163 mm
- Outside dimensions (without stand): 10-3/16" x 7-1/2" x 11/16", 259 mm x 190 mm x 17 mm
- Funky clip-on back piece removes to become a huge folding stand
- Elastic skin over 2-part polycarbonate frame
- Screen protector built in
- Apple Pencil holder in top edge
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Velcro for quick change (weak), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
Otterbox Defender iPad Air 4-5 10.9, Air 11 (M2) #495
Not to be confused with the later case #384 above. This one has the word "DROP+" lightly embossed inside the back, and the word "OTTERBOX" recessed into the outside back, and also fits the iPad Air 11 (M2). That one one has a clear plastic circle on the back that reveals the Apple logo on the iPad, has a big "Otter" and a little "box" on the back, and only fits the Air 4 and 5.
Measure the front opening to determine which one you have. This one has the bigger opening and is the one you want.
- Screen opening: 9-3/8" x 6-5/8", 238 mm x 169 mm
- Outside dimensions (without stand): 10-1/8" x 7-9/16" x 9/16", 259 mm x 191 mm x 15 mm
- Funky clip-on back piece removes to become a huge folding stand
- Elastic skin over 2-part polycarbonate frame
- Screen protector built in
- Apple Pencil holder in top edge
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, Velcro, magnets |
ProCase/BRAECN Rotating Hand Strap w/ Pencil Holder iPad Air 4-5 10.9/Air 11 (M2) #87B
Note! This is not the older case #156B below! That one fits the older iPad 11 Pro's and has the pencil holder surrounded on all 4 sides. This one fits the newer iPad Air 11 (M2) and has the pencil holder only surrounded on 3 sides (The 4th side is open to the iPad).
- Screen opening: 9-1/16" x 6-5/16", 230 mm x 161 mm
- Outside dimensions (without rotating stand): 11/16" x 8-5/16" x 13/16", 266 mm x 211 mm x 20 mm
- Apple Pencil holder
- Nice silicone skin over flimsy plastic shell
- Thin fabric shoulder strap with extremely thin metal or plastic clips, depending on the brand
- Off-center folding stand makes it easy to tip over
- Conveniently comes apart if you drop it
- Kids can take it apart with one hand for easy access to the iPad
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Velcro (weak, and holds the keyguard way off the screen), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
ProCase/BRAECN Rotating Hand Strap w/ Pencil Holder iPad Air 4-5 10.9/Pro 11 1st-4th Gen #156B
Careful here!
First this is not the newer case #87B above. That one fits the newer iPad Air 11 (M2) and has the pencil holder only surrounded on 3 sides (The 4th side is open to the iPad). This one fits the older iPad 11 Pros and has the pencil holder surrounded on all 4 sides.
Then, this case is not the same as the case #127B above. That case fits the Air 4-5 and the Air 11 (M2), sometimes called the Air 6th Gen. This one fits the iPad Air 4-5 and the Pro 11 1st-4th Gen. And if your case has the stand off-centered like this one, but it fits the Air 11 (M2), it's not this one, either!
Finally, this case is sold on Amazon under many different names, and even different listings call it different things. But it's easy to identify this case by the giant offset "X" on the back, the rotating Velcro hand strap, and the delicate shoulder strap. Do not confuse this case with the one without the pencil holder. This is the version with the pencil holder in the case. Also don't confuse it with the case #406 above. They both have a giant "X" on the back, but the rotating handle stand on that one is centered perfectly. On this one, it's offset, making for a very tippy stand.
- Screen opening: 9-1/16" x 6-3/8", 230 mm x 161 mm
- Outside dimensions: 10-3/8" x 8-5/16" x 13/16", 264 mm x 211 mm x 20 mm
- Apple Pencil holder
- Nice silicone skin over flimsy plastic shell
- Thin fabric shoulder strap with extremely thin metal or plastic clips, depending on the brand
- Off-center folding stand makes it easy to tip over
- Conveniently comes apart if you drop it
- Kids can take it apart with one hand for easy access to the iPad
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Velcro (weak, and holds the keyguard way off the screen), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
PRC-Saltillo VersaWrap iPad 7th-8th Gen 10.2, Air 4/Air 5 10.9, 10th Gen 10.9, Pro 11, #431
This is a funky case that stretches different ways to accommodate different iPad sizes, so it seems a little weird when you first put in the iPad. The screen opening ends up a different size for each different iPad size.
- Screen opening: 9-7/16" x 6-3/4", 240 mm x 172 mm
- Outside dimensions (with handle): 10-7/16" x 9-3/16" x 1", 265 mm x 233 mm x 25 mm
- Impact-resistant EVA material
- Folding stand
- Shoulder strap
- Optional speaker
- Pocket for adding an Apple AirTag
- Comes in a variety of colors
| Best Attachment | Snap-in |
| Possible Attachment | Straps (last resort) |
| Not Suitable for | Suction cups, suction tape, lock-in, Velcro, magnets |
Pure Sense Buddy
Pure Sense Buddy is a variant of the classic EVA folding handle stand. It's different in that it includes a thin shoulder strap and an anti-microbial surface.
To order a keyguard for the Pure Sense Buddy, choose the matching Classic EVA case above.
Rantice Kickstand iPad Air 4/5 10.9 #453
This case is sold under several different brand names. You can tell it by the tippy off-center kickstand with the "XXX" pattern on the back.
When ordering a keyguard to fit this case, you'll find it on our list as the Rantice Kickstand case #453.
- Screen opening: 9-1/16" x 6-5/16", 230 mm x 161 mm
- Outside dimensions (without kickstand): 10-3/16" x 7-15/16" x 1/2", 259 mm x 202 mm x 13 mm
- Hard shell with stiff elastic skin
- Folding off-center kickstand
- Comes in several colors
| Best Attachment | Snap-In, lock-in |
| Possible Attachment | Suction cups or suction tape (if grid permits), Velcro (very weak), elastic straps (last resort) |
| Not Suitable for | Magnets |
RJ Cooper Ultimate II
The Ultimate II is a variant of the classic EVA folding handle stand. RJ Cooper's version adds a shoulder strap and a more sturdy stand.
To order a keyguard for the Ultimate II, choose the matching Classic EVA case above.
ROISKIN Rotating Handle Stand iPad Air 4/5 10.9, Pro 11 1st-4th Gen #423
- Screen opening: 9-1/8" x 6-3/8", 231 mm x 163 mm
- Outside dimensions (without rotating handle): 10-3/8" x 7-5/8" x 13/16", 268 mm x 195 mm x 20 mm
- Removable front bezel
- Rotating octagonal handle/stand on back
- Shoulder strap
- Apple pen holder
| Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change (not very secure) |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
Roocase KidArmor
The Roocase KidArmor is a variant of the classic EVA folding handle stand.
To order a keyguard for the Roocase KidArmor, choose the matching Classic EVA case above.
SCSVPN Square Ring Stand iPad 4th-5th Gen 10.9/Pro 11 1st-4th Gen #168B
This case is sold on Amazon under many different names, and even different listings call it different things. But it's easy to identify this case by the giant "X" on the back and the squared-off ring stand.
Do not confuse this with the similar rotating hand strap stand above. This case has a rigid plastic ring stand centered on the back of the case. That one has a Velcro strap on the back.
Also don't confuse it with the similar rotating ring stand above. This case has a rounded square ring stand surrounded by a soft skin. That one has a round ring stand and the back of the case is clear plastic.
- Screen opening: 9-1/16" x 6-3/8", 230 mm x 161 mm
- Outside dimensions (without handle stand): 10-7/16" x 8-5/16" x 13/16", 265 mm x 211 mm x 21 mm
- Hard shell with elastic skin
- Removable front clip for easy insertion of iPad
- Rotating rounded-square ring stand
- Shoulder strap
- Apple pencil holder on top front and also elastic pencil/stylus holder on back ring stand
- Comes in several colors
| Best Attachment | Snap-In, lock-in |
| Possible Attachment | Velcro (weak and holds keyguard high off the screen), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
SEYMAC Rotating Handle Stand iPad Air 4/5 10.9/Pro 11 1st-2nd Gen #109B
This case is sold under several different brand names. One thing to note is that the small screen opening can require compromises on the keyguard design. Items close to the edge of the screen may be hard to reach.
- Screen opening: 9-1/16" x 6-3/8", 231 mm x 162 mm
- Outside dimensions (without rotating handle): 10-1/2" x 8-5/16" x 13/16", 267 mm x 211 mm x 21 mm
- Removable front bezel with built-in screen protector
- Rotating handle/stand on back
- Thin shoulder strap
- Stylus/pen holder
| Best Attachment | Snap-In or lock-in. Keyguard comes on and off with the removable front bezel. |
| Possible Attachment | Velcro (holds the keyguard high off the screen), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
SUPLIK Folding Handle w/ Built-in Screen Protector iPad Air 4-Air 5 10.9/Pro 11 1st-4th Gen #429
Not to be confused with similar-looking cases, this one is distinguishable by the folding handle, no plastic feet, and large rectangular shape embossed on the back.
- Screen opening: 9-3/16" x 6-1/2", 234 mm x 166 mm
- Outside dimensions (with handle and folded feet): 11" x 11-1/4" x 7/8", 280 mm x 285 mm x 22 mm
- EVA foam case
- Folding handle with holes for attaching a strap (not included)
- Comes in pink or blue.
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, Velcro, magnets |
SUPLIK Rigid Handle w/ Built-in Screen Protector iPad Air 4-Air 5 10.9/Pro 11 1st-4th Gen #23B
Not to be confused with similar-looking cases, this one is distinguishable by the arched, rigid handle, two folding plastic feet on the back, and large angular shape embossed on the back.
- Screen opening: 9-3/16" x 6-1/2", 234 mm x 166 mm
- Outside dimensions (with handle and folded feet): 10-9/16" x 9-9/16" x 7/8", 280 mm x 285 mm x 22 mm
- EVA foam case
- Rigid arched handle
- Comes in several colors.
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, Velcro, magnets |
SUPLIK/TOEVEK Robot Case iPad Air 4-Air 5 10.9/Air 11/Pro 11 #410
There are similar-looking cases that should not be confused for the Robot case. This case has a banana-shaped opening under the top handle and cat's eye-shaped openings under the right and left handles.
There are two versions of the robot case for the 10.9/11" iPads. The red case below also fits the iPad 10th Gen and you can identify it visually by the additional camera openings along the top edge of the main screen opening.
- Screen opening: 9-3/8" x 6-3/4", 238 mm x 171 mm
- Outside dimensions (including handles and kick stand): 13-3/4" x 10-1/16" x 1-1/8", 348 mm x 255 mm x 30 mm
- Headphone-wearing robot on back
- Robot's legs fold out to become a stand
- Comes with thin shoulder strap
| Best Attachment | Snap-in for permanent mounting |
| Possible Attachment | Suction cups, suction tape, elastic straps (last resort) |
| Not Suitable for | Lock-in, Velcro, magnets |
Travellor Kido
The Travellor Kido is a variant of the classic EVA folding handle stand.
To order a keyguard for the Travellor Kido, choose the matching Classic EVA case above.
Unicorn Beetle PRO iPad Air 4 10.9 #56B
- Screen opening: 9-1/16" x 6-5/16", 230 mm x 161 mm
- Outside dimensions: 10-3/16" x 7-15/16" x 9/16", 258 mm x 202 mm x 15 mm
- Polyurethane skin over polycarbonate shell
- Built-in screen protector
- Built-in kickstand
- Apple Pencil holder
- Easiest rigid case to insert and remove iPad
- Affordable - the best value among rigid cases
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Straps, Velcro (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |