Originally published March 10, 2019
This page covers cases that we support for keyguards to fit the 12.9" iPad Pro 12.9 3rd, 4th, 5th or 6th Gen.
If you have an iPad other than a Pro 12.9" 3rd, 4th, 5th or 6th Gen., you're on the wrong page.
For an iPad Pro 12.9" 1st or 2nd Gen, look here.
For an iPad Air 13 (M2), look here.
For an iPad Pro 13 (M4), look here.
For any other iPad, look here.
When you order a keyguard for an iPad Pro 12.9, specify the name and number of the case you find here. You must use the red number to correctly identify a case! Cases are listed alphabetically, but you can also search the page by the name of an iPad case to find one that is sold under more than one brand name.
If you have an iPad Pro 12.9 case that we don't have depicted here, specify "Other" case when ordering a keyguard and send us a link to the case you have. We'll charge you a small fee to buy the case, measure it, design a keyguard to fit it, and make and test fit the keyguard. After that, we'll add it to our list so you can order keyguards to fit it in the future.
Adaptive Tech Solutions Rugged Rubber
The Rugged Rubber case is a variant of the classic EVA folding handle stand. Adaptive Tech Solution's version adds a shoulder strap.
To order a keyguard for the Rugged Rubber, choose the matching Classic EVA case below.
ArmorBox Kido
The ArmorBox Kido case is a variant of the classic EVA folding handle stand.
To order a keyguard for the ArmorBox Kido, choose the matching
Classic EVA case below.
Avawo Kids Case
The Avawo Kids Case is a variant of the classic EVA folding handle stand.
To order a keyguard for the Avawo Kids Case, choose the matching Classic EVA case below.
Bam Bino Space Suit iPad Pro 12.9 3rd/4th/5th/6th Gen #306
- Screen opening: 10-1/2" x 7-15/16", 267 mm x 202 mm
- Outside dimensions (with handle): 12-7/16" x 11" x 7/8", 315 mm x 280 mm x 23 mm
- Removable front bezel with built-in screen protector
- Comes in a variety of colors
- EVA material
| Best Attachment | Snap-In or lock-in |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, Velcro, magnets |
BATYUE Swivel Stand iPad Pro 12.9 5th Gen #412
This case is similar to at least two other Miesherk models for this iPad and should not be confused with them. The folding stand on this version is not adjustable, and the handle/strap is leather-ish as opposed to elastic fabric. The outer skin feels like hard rubber as opposed to case #403 below. It does NOT have the giant "X" shape on the back.
- Screen opening: 10-3/8" x 7-13/16", 263 mm x 198 mm
- Outside dimensions (not including rotating handle): 11-7/16" x 9-7/16" x 5/8", 292 mm x 239 mm x 16 mm
- Stiff polyurethane skin over polycarbonate shell with removable polycarbonate screen bezel
- Rotating handle with fake leather strap
- Non-adjustable kickstand
- Apple Pencil holder
- Black with optional color highlights
| Best Attachment | Snap-In or Lock-in for permanent mounting |
| Possible Attachment | Velcro (weak), elastic straps (last resort) |
| Not Suitable for | Magnets, suction cups, suction tape |
Bolete Kids Shock Proof
The Bolete Kids Shock Proof is a variant of the classic EVA folding handle stand.
To order a keyguard for the Bolete Kids Shock Proof, choose the matching Classic EVA case below.
BRAECN Heavy Duty w/ Swivel Stand iPad Pro 12.9 3rd-4th-5th-6th Gen #303
This case is sold on Amazon under many different names, and even different listings call it different things. But it's easy to identify this case by the giant offset "X" on the back, the rotating Velcro hand strap, and the delicate shoulder strap.
Don't confuse this with the similar case #28B below. That one has a square ring stand centered on the back and camera openings below the pencil holder. This one has a Velcro hand strap placed off-center on the back, and no camera openings below the pencil holder.
- Screen opening:10-7/16" x 7-7/8", 265 mm x 200 mm
- Outside dimensions (without rotating stand): 12-1/8" x 9-15/16" x 13/16", 307 mm x 252 mm x 21 mm
- Nice silicone skin over flimsy plastic shell
- Thin fabric shoulder strap with thin metal or plastic clips, depending on the brand
- Off-center folding stand makes it easy to tip over
| Best Attachment | Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change (both hold the keyguard high off the screen) |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape |
BRAECN Rotating Square Ring Stand iPad Pro 12.9 3rd-4th-5th-6th Gen/Air 13 (M2) #28B
This case is sold on Amazon under many different names, and even different listings call it different things. But it's easy to identify this case by the giant centered "X" on the back, the rotating and folding ring stand, and the delicate shoulder strap.
Don't confuse this with the similar case #303 above. That one has a Velcro hand strap placed off-center on the back, and no camera openings below the pencil holder. This one has a square ring stand centered on the back and camera openings below the pencil holder.
- Screen opening:10-7/16" x 7-7/8", 265 mm x 200 mm
- Outside dimensions (without rotating stand): 12-1/8" x 9-15/16" x 13/16", 307 mm x 252 mm x 21 mm
- Nice silicone skin over hard plastic shell
- Thin fabric shoulder strap with thin metal or plastic clips, depending on the brand
- Centered folding stand makes it less tippy than the #303 above
| Best Attachment | Snap-In or lock-in for permanent mounting, Velcro for quick change (weak and holds the keyguard high off the screen) |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
BuddiBox EVA Series
The BuddiBox EVA Series is a variant of the classic EVA folding handle stand.
To order a keyguard for the BuddiBox EVA Series, choose the matching Classic EVA case below.
CaseBuddy Tough Box iPad Pro 12.9 3rd-4th-5th Gen #489
- Screen opening:10-3/8" x 7-13/16", 264 mm x 199 mm
- Outside dimensions (without removable stand): 11-13/16" x 9-1/4" x 3/4", 300 mm x 235 mm x 20 mm
- Nice silicone skin over hard plastic shell
- Removable screen protector in plastic frame
- Detachable folding stand
| Best Attachment | Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change (both hold the keyguard high off the screen) |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape |
Classic EVA iPad Pro 12.9 3rd-4th-5th-6th Generation #27
This case is sold under a huge variety of brand names. There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.
- Screen opening: 10-5/8" x 8", 270 mm x 204 mm
- Outside dimensions (with handle): 11-7/8" x 12-15/16" x 7/8", 301 mm x 328 mm x 22 mm
- Comes in several colors
- Folding handle becomes stand
| Best Attachment | Snap-In |
| Possible Attachment | Suction cups, suction tape, straps (last resort) |
| Not Suitable for | Lock-in, Velcro, magnets |
CODi Rugged Rotating Handle Stand iPad Pro 12.9 3rd-4th-5th-6th Gen #303
This case is sold on Amazon under many different names, and even different listings call it different things. But it's easy to identify this case by the giant "X" on the back, the rotating Velcro hand strap, and the delicate shoulder strap.
To order a keyguard to fit this case, choose the BRAECN case #303 above.
Cooper Dynamo
The Cooper Dynamo is a variant of the classic EVA folding handle stand. Don't confuse it with the Cooper DynamoRE described below, which comes with a removable screen protector frame.
To order a keyguard for the classic Cooper Dynamo, choose the matching Classic EVA case above.
eTopxizu Tablet Case
The eTopxizu Tablet Case is a variant of the classic EVA folding handle stand.
To order a keyguard for the eTopxizu Tablet Case, choose the matching Classic EVA case above.
Fintie Kiddie (not Kiddie Light)
The Fintie Kidde, also called the Fintie Casebot Kiddie, is a variant of the classic EVA folding handle stand. Do not confuse it with the Fintie Kiddie Light, or the Fintie Casebot Kiddie Light.
To order a keyguard for the Fintie Kiddie, choose the matching Classic EVA case above.
GEEKSDOM Rotating Handle Stand w/ Pencil Holder iPad Pro 12.9 5th-6th Gen #436
- Screen opening: 10-3/8" x 7-3/4", 263 mm x 198 mm
- Outside dimensions (not including rotating handle): 11-1/2" x 9-7/16" x 5/8", 393 mm x 240 mm x 16 mm
- Polycarbonate shell
- TPU skin
- Rotating handle
- Fabric shoulder strap
- Non-adjustable kickstand
- Apple Pencil holder
| Best Attachment | Snap-In or Lock-in for permanent mounting |
| Possible Attachment | Velcro (very weak and holds the keyguard high off the screen), elastic straps (last resort) |
| Not Suitable for | Magnets, suction cups, suction tape |
HDE Shock Proof
The HDE Shock Proof, also called the HDE Kids Case, is a variant of the classic EVA folding handle stand. Do not confuse it with the HDE Shockproof Case with a built-in screen protector.
To order a keyguard for the HDE Shock Proof, choose the matching Classic EVA case above.
Herize/SEYMAC Rotating Handle Stand iPad Pro 12.9 3rd-4th Gen #59B
This case is sold on Amazon under several different brand names. When ordering a keyguard, you will not find this case on our "To Fit Case" list. Instead, you'll find it listed as the SEYMAC Rotating Handle Stand #59B.
Do not confuse this for the SUPFIVE case #403 below. That one has the big "X" on the back, and this one does not. Check the outside dimensions to be sure.
i-Blason Halo iPad Pro 12.9 3rd Gen #324
- Screen opening (not including pencil holder): 10-1/2" x 8-1/2", 267 mm x 215 mm
- Outside dimensions: 11-5/16" x 9" x 9/16", 287 mm x 229 mm x 14 mm
- Flexible but stiff transparent shell with folio cover
- Folio cover doubles as folding stand
- Holder for stylus or Apple Pencil
| Best Attachment | |
| Possible Attachment | Velcro (attaches directly to screen protector), suction cups, suction tape, straps (last resort) |
| Not Suitable for | Lock-in, magnets, snap-In |
Inclusive TLC Skyle 2 iPad Pro 12.9 3rd-4th-5th-6th Gen #404
- Screen opening: 10-13/16" x 8-3/16", 274 mm x 208 mm
- Outside dimensions (including eyegaze unit): 12-5/16" x 10-11/16" x 2-1/16", 313 mm x 273 mm x 53 mm
- Eye tracking
- Built-in switch interface
- VESA mount
- Optional tabletop stand, floor stand or clamp mount
| Best Attachment | Snap-In or lock-in for permanent mounting (requires taking case apart), Velcro or magnets for quick change |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape |
Joy Factory aXtion Bold/Bold MP/Bold MPS iPad Pro 12.9 3rd-4th-5th-6th Gen #305
This is a very expensive case whose only unique feature is a security cable that attaches with double-sided tape. If you want people to not bother stealing your iPad because it looks like it's secured to the table, this might be the case for you. Otherwise, there are many less expensive cases that provide the same or more protection to the iPad.
- Screen opening: 10-7/16" x 7-13/16", 265 mm x 199 mm
- Outside dimensions (measured near the corners): 11-13/16" x 9-3/16" x 7/8", 300 mm x 233 mm x 22 mm
- 360° rotating handle with small, flimsy stand
- Built-in screen protector
- High-quality silicone skin is difficult to seat over thin, flimsy frame
- Security cable taped to back of iPad is apparent theft deterrent
- Slotted corners for attaching shoulder strap (not included)
| Best Attachment | Snap-In or Lock-in for permanent mounting |
| Possible Attachment | Straps (last resort) |
| Not Suitable for | Velcro, magnets, suction cups, suction tape |
Kay's Case KidBox
The Kay's Case KidBox is a variant of the classic EVA folding handle stand.
To order a keyguard for the Kay's Case KidBox, choose the matching Classic EVA case above.
MAX Cases Extreme Shield iPad Pro 12.9 3rd/4th Gen #29B
Easily confused for the case #176 below. The difference is that this model does not have the built-in pencil holder. Keyguards made for the #176 will fit the #29B, but not vice versa.
- Screen opening: 10-3/8" x 7-13/16", 264 mm x 199mm
- Outside dimensions: 11-7/16" x 8-7/8" x 9/16", 291 mm x 225 mm x 15 mm
- Rotating handle and adjustable kickstand
| Best Attachment | Snap-In or Lock-in for permanent mounting |
| Possible Attachment | Straps (last resort) |
| Not Suitable for | Velcro, magnets, suction cups, suction tape |
MAX Cases Extreme Shield w/ Pencil Garage iPad Pro 12.9 3rd/4th Gen #176
Easily confused for the case #29B above. The difference is that this model has the built-in pencil holder. Keyguards made for the #176 will fit the #29B, but not vice versa.
- Screen opening: 10-3/8" x 7-13/16", 263 mm x 198mm
- Outside dimensions: 11-7/16" x 9-7/16" x 5/8", 291 mm x 239 mm x 16 mm
- Rotating handle and adjustable kickstand
| Best Attachment | Snap-In or Lock-in for permanent mounting |
| Possible Attachment | Straps (last resort) |
| Not Suitable for | Velcro, magnets, suction cups, suction tape |
Miesherk Rotating Kickstand iPad Pro 12.9 3rd Gen #30A
This case is similar to at least two other Miesherk models for this iPad and should not be confused with them. This version does not have an Apple Pencil holder.
- Screen opening: 10-3/8" x 7-13/16", 264 mm x 199 mm
- Outside dimensions (not including rotating handle): 11-7/16" x 8-7/8" x 5/8", 291 mm x 226 mm x 15 mm
- Rotating handle with elastic strap
- Adjustable kickstand
| Best Attachment | Snap-In or Lock-in for permanent mounting |
| Possible Attachment | Straps (last resort) |
| Not Suitable for | Velcro, magnets, suction cups, suction tape |
Miesherk/SUPFIVE Rotating Handle Stand w/ Pencil Holder and Flexible Skin iPad Pro 12.9 3rd-4th-5th-6th Gen #403
This case is similar to at least two other Miesherk models for this iPad and should not be confused with them. The folding stand on this version is not adjustable, and the handle/strap is leather-ish as opposed to elastic fabric. The outer skin is soft and flexible as opposed to case #405 below. It also has a giant "X" shape on the back.
- Screen opening: 10-3/8" x 7-3/4", 263 mm x 198 mm
- Outside dimensions (not including rotating handle): 11-11/16" x 9-11/16" x 3/4", 298 mm x 246 mm x 20 mm
- "Liquid silicone" skin over polycarbonate shell with removable polycarbonate screen bezel
- Rotating handle with fake leather strap
- Non-adjustable kickstand
- Apple Pencil holder
| Best Attachment | Snap-In or Lock-in for permanent mounting |
| Possible Attachment | Velcro (weak and holds the keyguard high off the screen), elastic straps (last resort) |
| Not Suitable for | Magnets, suction cups, suction tape |
Miesherk Rotating Handle Stand w/ Pencil Holder and Stiff Skin iPad Pro 12.9 3rd-4th-5th Gen #405
This case is similar to at least two other Miesherk models for this iPad and should not be confused with them. The folding stand on this version is not adjustable, and the handle/strap is leather-ish as opposed to elastic fabric. The outer skin feels like hard rubber as opposed to case #403 above. It does NOT have the giant "X" shape on the back.
- Screen opening: 10-3/8" x 7-13/16", 263 mm x 198 mm
- Outside dimensions (not including rotating handle): 11-7/16" x 9-7/16" x 5/8", 292 mm x 239 mm x 16 mm
- Stiff polyurethane skin over polycarbonate shell with removable polycarbonate screen bezel
- Rotating handle with fake leather strap
- Non-adjustable kickstand
- Apple Pencil holder
- Black with optional color highlights
| Best Attachment | Snap-In or Lock-in for permanent mounting |
| Possible Attachment | Straps (last resort) |
| Not Suitable for | Velcro, magnets, suction cups, suction tape |
Monoprice Kidz Cover
The Monoprice Kidz Cover is a variant of the classic EVA folding handle stand.
To order a keyguard for the Monoprice Kidz Cover, choose the matching Classic EVA case above.
Muse Case For iPad 12.9 3rd Gen #302A
- Screen opening: 10-15/16" x 8-3/8", 278 mm x 212 mm
- Outside dimensions: 11/3/8" x 8-3/4" x 9/16", 288 mm x 222 mm x 14 mm
- Cover doubles as folding stand
- Holder for stylus or Apple Pencil
| Best Attachment | |
| Possible Attachment | Velcro (attaches directly to screen protector), suction cups, suction tape, elastic straps (last resort) |
| Not Suitable for | Lock-in, magnets, snap-in |
No Case For iPad Pro 12.9 Any Generation #0
When you order a keyguard for an iPad that is not in a case, choose "No Case" from the list of cases.
| Best Attachment | Velcro for quick change (attaches directly to screen protector), suction cups, suction tape |
| Possible Attachment | Straps (last resort) |
| Not Suitable for | Magnets, snap-in or lock-in |
Otterbox Defender iPad Pro 12.9 3rd Gen #31A
Not to be confused with the very similar case #413 below. This one is the older version and has a rectangular opening with 2 of the four corners much more rounded than the other two, and it has "Otterbox" printed on the inside back cover, near the power cord opening. That one says "DROP+" on the inside. This one has a pencil holder that's part of the elastic skin and hinges from the front. That one has a hard plastic pencil holder on the side of the case that hinges from the back. On both models, the pencil can be stored permanently in the removable stand.
Check the screen opening measurement to be sure you pick the right one.
- Screen opening: 10-9/16" x 8", 268 mm x 203 mm
- Outside dimensions (without stand): 11-1/2" x 9" x 11/16", 293 mm x 227 mm x 17 mm
- 3 notches at camera end of screen opening for cameras and ambient light sensors
- Funky clip-on back piece removes to become a huge folding stand
- Elastic skin over 2-part polycarbonate frame
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Velcro for quick change (attaches directly to the screen protector, partially blocks some openings), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
Otterbox Defender DROP+ iPad Pro 12.9 3rd/4th/5th/6th Gen #413
Not to be confused with the very similar case #31A above. This one is the newer version and has a rounded-square camera opening with "DROP+" printed on the inside back panel. That one says "Otterbox" on the inside back panel near the power cord opening. This one has a hard plastic pencil holder on the side of the case that hinges from the back. That one has a pencil holder that's part of the elastic skin and hinges from the front. On both models, the pencil can be stored permanently in the removable stand.
Check the screen opening measurement to be sure you pick the right one.
- Screen opening: 10-11/16" x 8-1/16", 271 mm x 205 mm
- Outside dimensions (without stand): 11-1/2" x 8-15/16" x 1-1/8", 293 mm x 227 mm x 15 mm
- 3 notches at camera end of screen opening for cameras and ambient light sensors
- Funky clip-on back piece removes to become a huge folding stand
- Elastic skin over 2-part polycarbonate frame
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Velcro for quick change (attaches directly to the screen protector, partially blocks some openings), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
Otterbox Symmetry For iPad Pro 12.9 3rd/4th Gen #386
- Screen opening: 11" x 8-7/16", 280 mm x 214 mm
- Outside dimensions: 11-1/4" x 8-11/16" x 7/16", 286 mm x 221 mm x 11 mm
- Stiff elastic shell
- Folio cover folds to back of iPad to become stand
| Best Attachment | Suction cups, suction tape |
| Possible Attachment | Straps (last resort) |
| Not Suitable for | Velcro, magnets, snap-in or lock-in |
Poetic Revolution iPad Pro 12.9 4th-5th-6th Gen (front mounted Apple Pencil) #41B
- Screen opening: 10-3/8" x 7-3/4", 263 mm x 198 mm
- Outside dimensions: 11-1/2" x 9-7/16" x 9/16", 293 mm x 270 mm x 14 mm
- TPU skin/bumpers over polycarbonate shell
- Built-in screen protector
- Attached folding stand
- Apple Pencil holder molded into front
- Available in black on black
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Velcro for quick change (weak and holds keyguard high off the screen), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
PRC-Saltillo VersaWrap iPad Pro 12.9 3rd-6th Gen, Air 13-inch (M2), Pro 13-inch (M4), #432
- Screen opening: 10-9/16" x 8-1/16", 269 mm x 205 mm
- Outside dimensions (with handle): 11-3/4" x 10-5/8" x 1-1/16", 299 mm x 270 mm x 27 mm
- Impact-resistant EVA material
- Folding stand
- Shoulder strap
- Optional speaker
- Pocket for adding an Apple AirTag
- Comes in a variety of colors
| Best Attachment | Snap-in |
| Possible Attachment | Straps (last resort) |
| Not Suitable for | Suction cups, suction tape, lock-in, Velcro, magnets |
Pure Sense Buddy
Pure Sense Buddy is a variant of the classic EVA folding handle stand. It's different in that it includes a thin shoulder strap and an anti-microbial surface.
To order a keyguard for the Pure Sense Buddy, choose the matching Classic EVA case above.
RJ Cooper Ultimate II
The Ultimate II is a variant of the classic EVA folding handle stand. RJ Cooper's version adds a shoulder strap and a more sturdy stand.
To order a keyguard for the Ultimate II, choose the matching Classic EVA case above.
Roocase KidArmor
The Roocase KidArmor is a variant of the classic EVA folding handle stand.
To order a keyguard for the Roocase KidArmor, choose the matching Classic EVA case above.
SCSVPN Rotating Ring Stand iPad Pro 12.9 5th Gen #407
This case is similar to several other cases sold on Amazon under different brand names. To distinguish it from others, note the rounded-square ring stand on the back and the depression around the main camera opening on the front.
- Screen opening: 10-3/8" x 7-13/16", 263 mm x 199 mm
- Outside dimensions (including corner bumpers, not including ring stand): 12-1/8" x 9-15/16" x 7/8", 308 mm x 252 mm x 22 mm
- Rotating ring stand
- Elastic skin over polycarbonate shell
- Clip-on front bezel for easy removal of iPad
- Shoulder strap
- Pencil holder on front
| Best Attachment | Snap-In or lock-in for permanent mounting, magnets for quick change (holds keyguard way off the screen) |
| Possible Attachment | Velcro (holds keyguard high off the screen, elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape |
SEYMAC Rotating Handle Stand iPad Pro 12.9 3rd-4th Gen #59B
This case is sold on Amazon under several different brand names, including TimeCity and SIBEITU. When ordering a keyguard, you'll find it on our list of cases as the "SEYMAC Rotating Handle Stand #59B".
Do not confuse this for the SUPFIVE case #403 below. That one has the big "X" on the back, and this one does not. Check the outside dimensions to be sure.
- Screen opening: 10-3/8" x 7-13/16", 264 mm x 198 mm
- Outside dimensions: 11-13/16" x 9-3/4" x 7/8", 300 mm x 248 mm x 22 mm
- Rotating handle stand
- Some versions come with a shoulder strap
- Pencil garage on front
| Best Attachment | Snap-In or lock-in for permanent mounting |
| Possible Attachment | Velcro (barely adequate and not recommended), straps (last resort) |
| Not Suitable for | Magnets, suction cups, suction tape |
SIBEITU/SEYMAC Rotating Handle Stand iPad Pro 12.9 3rd-4th Gen #59B
This case is sold on Amazon under several different brand names. When ordering a keyguard, you will not find this case on our "To Fit Case" list. Instead, you'll find it listed as the SEYMAC Rotating Handle Stand #59B.
Do not confuse this for the SUPFIVE case #403 below. That one has the big "X" on the back, and this one does not. Check the outside dimensions to be sure.
SUPFIVE/Miesherk Rotating Handle Stand Pro 12.9 3rd-4th-5th Gen Gen #403
This case is sold under different brand names. To order a keyguard to fit this case, you'll find it on our To Fit Case list as the Miesherk case #403.
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Velcro (barely adequate and not recommended), straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
TimeCity/SEYMAC Rotating Handle Stand iPad Pro 12.9 3rd-4th Gen #59B
This case is sold on Amazon under several different brand names. When ordering a keyguard, you will not find this case on our "To Fit Case" list. Instead, you'll find it listed as the SEYMAC Rotating Handle Stand #59B.
Do not confuse this for the SUPFIVE case #403 above. That one has the big "X" on the back, and this one does not. Check the outside dimensions to be sure.
Tobii Dynavox TD Pilot iPad Pro 12.9 3rd-4th-5th Gen #411
- Screen opening: 10-3/8" x 7-13/16", 264 mm x 199 mm
- Outside dimensions (with stand folded): 12" x 10" x 1-7/16", 305 mm x 254 mm x 34 mm
- Eye tracking
- Amplified speakers
- Folding stand
| Best Attachment | Snap-In or lock-in for permanent mounting |
| Possible Attachment | Velcro (barely adequate and not recommended), straps (last resort) |
| Not Suitable for | Magnets, suction cups, suction tape |
Travellor Kido
The Travellor Kido is a variant of the classic EVA folding handle stand.
To order a keyguard for the Travellor Kido, choose the matching Classic EVA case above.
Unicorn Beetle iPad Pro 12.9 5th-6th Gen (top edge mounted Apple Pencil) #482
Not to be confused with the Beetle #22B below with the Apple Pencil mounted in the front of the case. This one has the pencil holder mounted on the top edge of the case.
- Screen opening: 11" x 8-3/8", 278 mm x 213 mm
- Outside dimensions: 11-7/16" x 8-7/8" x 11/16", 290 mm x 225 mm x 17 mm
- One-piece polycarbonate/TPU molded shell
- Attached folding stand
- Apple Pencil holder molded onto top edge
- Available in black only
| Best Attachment | Suction cups, suction tape, Velcro (attaches directly to screen) |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Snap-in, lock-in, magnets |
Unicorn Beetle Pro iPad Pro 12.9 3rd Gen (non-Apple pencil) #33
- Screen opening: 10-3/8" x 7-3/4", 264 mm x 197 mm
- Outside dimensions: 11-7/16" x 8-7/8" x 5/8", 291 mm x 226 mm x 16 mm
- Polyurethane skin over polycarbonate shell
- Built-in screen protector
- Attached folding stand
- Easiest rigid case to insert and remove iPad
- Available in black on black
- Affordable - the best value among rigid cases
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Velcro for quick change (very weak and holds the keyguard high off the screen), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
Unicorn Beetle Pro iPad Pro 12.9 4th-5th-6th Gen (front mounted Apple Pencil) #22B
Not to be confused with the Beetle #482 below with the Apple Pencil mounted to the top edge of the case. This one has the pencil holder molded into the front of the case.
- Screen opening: 10-3/8" x 7-3/4", 263 mm x 198 mm
- Outside dimensions: 11-1/2" x 9-3/8" x 5/8", 291 mm x 235 mm x 16 mm
- Polyurethane skin over polycarbonate shell
- Built-in screen protector
- Attached folding stand
- Apple Pencil holder molded into front
- Available in black on black
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Velcro for quick change (weak and holds keyguard high off the screen), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
ZtotopCases Magnetic Folio iPad Pro 12.9 4th Gen #408
This is a great case that provides us with limited options for attaching a keyguard. None of our preferred attachment methods work with this case.
- Screen opening: 10-13/16" x 8-7/16", 279 mm x 213 mm
- Outside dimensions (not including camera opening): 11-5/16" x 9-1/16" x 5/8", 285 mm x 230 mm x 15 mm
- Stiff elastic shell
- Folio cover folds to back of iPad to become adjustable stand
- Apple Pencil holder
| Best Attachment | Suction cups, suction tape (partial blockage of some openings) |
| Possible Attachment | Straps (last resort) |
| Not Suitable for | Snap-in, lock-in, Velcro, magnets |
ZtotopCases Turtle iPad Pro 12.9 5th Gen #34A
- Screen opening: 10-3/8" x 7-3/4", 263 mm x 198 mm
- Outside dimensions: 11-7/16" x 9-1/16" x 9/16", 290 mm x 230 mm x 15 mm
- Built-in screen protector
- Attached folding stand
- Apple Pencil holder
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Velcro for quick change (weak and holds the keyguard high off the screen), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |
ZUGU Slim Folio iPad Pro 12.9 5th Gen #428
This is a another good case that provides us with limited options for attaching a keyguard.
- Screen opening: 10-15/16" x 8-5/16", 278 mm x 211 mm
- Outside dimensions (not including folding stand): 11-3/8" x 8-7/8" x 5/8", 289 mm x 226 mm x 15 mm
- Stiff elastic shell
- Folio cover folds to back of iPad to become adjustable stand
- Apple Pencil holder
| Best Attachment | Suction cups, suction tape (partial blockage of some openings) |
| Possible Attachment | Straps (last resort) |
| Not Suitable for | Snap-in, lock-in, Velcro, magnets |